Previous Page  ToC  Next Page

Unpacking Loading Cassette Trolley

Unpacking Trolley

The Loading Cassette trolley packaging and the Cassette packaging are supplied together. "Unpacking Trolley" & "Trolley Assembly" describe the Trolley unpacking and assembly, and "Placing Cassette" in "Trolley Assembly" describes the Cassette.

See the parts list attached to the trolley packaging.

Unpacking Trolley

The trolley is disassembled before packing, see "Trolley Assembly" for trolley assembly instructions. One (1) technician is required to unpack the trolley.

1. Cut the bands to separate the Trolley packaging (upper packaging) from the Cassette packaging (bottom packaging).
2. Open the top flaps of the trolley packaging.
3. Remove the staples that connect the top wooden strut to the packaging.
4. Lift out the top wooden strut with the parts connected to it.
5. Disconnect the top trolley assembly that is connected to the wooden strut, using an 1/2" open-end wrench.
6. Remove the small plastic bag containing the bolts and plugs required for the Trolley assembly.
7. Remove the staples that connect the bottom wooden strut to the packaging.
8. Lift out the wooden strut with the parts connected to it.
9. Disconnect the trolley parts connected to the wooden strut: the two side assemblies and the vertical assembly, using an 1/2" open-end wrench.

See "Trolley Assembly" for Trolley assembly instructions.

Copyright (c)1998 Scitex Corporation Ltd. All rights reserved. Certain names, logos, designs, titles, words or phrases on this page may constitute trademarks, servicemarks, or tradenames of CreoScitex Corporation Ltd. or other entities which may be registered in certain jurisdictions.

Top of Page  Previous Page  ToC  Next Page