Previous Page  ToC  Next Page

Air Compressor Connection

1. Pull out the air pressure tube (orange tube) through the cable opening at the bottom of the platesetter (same opening as main power cable - see "Power Connection"). The tube is supplied with the machine and is 5 meters long.
2. Connect the air pressure regulator, which includes the air pressure filters and gauge, to the air pressure tube (the regulator with the filter are supplied with the platesetter).
3. Connect the air pressure regulator to the air pressure outlet on the wall. See the air compressor specifications in Lotem 800 Site Preparation guidelines.
4. Set the gauge to 6 ATM (90 psi).

1 - Air pressure gauge 6 - Shut-down faucet (optional)
2 - Air pressure tube to platesetter 7 - Customer air outlet
3 - Air pressure control (counter-clockwise to open)
4 - 2 screws attached to wall 8 - Two air filters
5 - Quick industrial connector 9 - Water drainage
Figure 2-12: Air compressor connection

Copyright (c)1998 Scitex Corporation Ltd. All rights reserved. Certain names, logos, designs, titles, words or phrases on this page may constitute trademarks, servicemarks, or tradenames of CreoScitex Corporation Ltd. or other entities which may be registered in certain jurisdictions.

Top of Page  Previous Page  ToC  Next Page