Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Parts - Delicate Media Picker

For information on the non delicate media picker parts, see the Picker parts page.

For information on the LIONEL board and Pressure Sensor Expansion Board (PSEB), see the Boards page.

For information on cables, see the Cables page.

Item Stored Service Parts Reference Notes/Photos
Delicate Media Picker Assembly
   HSG bridge assembly		 500-02873A
500-02862A		 BOM | DWG
item 20		  
DM Picker Slider
   Vacuum generator tube		 500-02863A
340-00015		 BOM | DWG
item 400		  
DM Picker Linkage
   Shaft E-ring 0.25 in.
   Shaft E-ring 0.125 in.
   Roller top cable assembly
   Roller bottom cable assembly		 500-02905A
390-00268
390-00267
500-02902A
500-02903A		 BOM | DWG
item 201
item 123
item 60
item 70		  
P-cup Arm 500-02861A BOM | DWG  
Cylinder Slider Bin 500-02881A BOM | DWG  
Cylinder Slider Extension 500-02880A BOM | DWG  
Cylinder Roller 500-02882A BOM | DWG  
DM Picker Roller Assembly
   Shaft coupling
   Roller adapter
   Flexshaft
   Suction cup fitting
   Male tube fitting
   Suction cup roller fitting
   Roller sensor side bushing
   Roller motor side bushing		 500-02831A
348-00043
252-08781A
358-00004
340-00003
55-0070
252-08777A
252-08815A
252-08816A		 BOM | DWG
item 50
item 60
item 70
item 120
item 130
item 140
item 160
item 170		  
Spring 0.5inx2 318-00177 500-02873A DWG item 100  
Spring 1-2inx5 318-00176 500-02863A DWG item 100  
DM Picker Manifold 500-02884A BOM | DWG Valves:
  • "picker arm down"
  • picker slider extend plate pick on/lock/off
  • picker slider ss pick on/lock/off
  • picker slider bin on/lock/off
  • "picker plate push on"
  • pressure sensor
  • "picker pcups on"
  • "picker pcups on"
  • picker roller up fast
  • "picker roller vac on"
  • picker roller down bin
  • picker roller down pick
[Names in quotation marks are identical to the firmware command.]
Manifold solenoid valve—single action 55-0771    
Manifold solenoid valve—double action 55-0989    
DM Picker spares kit 518-01496A    
DM picker height jig 690-00700A DWG Used to adjust the height from the bottom of the DM picker base plate to the plenum (82 mm). Two jigs are required for the adjustment.
DM Picker height adjustment block 252-09222A    

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.