Installation

For configuration and upgrade procedures, see the Procedures page.

Acceptance | Installation procedures | See also | Site preparation

Note: After every installation, open the Output Devices Installation Report Tool and submit the Installation Report. For instructions, see Using the Output Devices Installation Report Tool. Install the Trendsetter Installation Report Tool on the device workstation if necessary.

Acceptance

• Trendsetter NEWS Installation Test Procedure
• Trendsetter NEWS Installation Test Procedure Checklist
  Dutch | French | German | Italian | Spanish
• ITP test files

Installation procedures

• Trendsetter NEWS (GMCE) Installation Guide
  • Operator Onsite Training Checklist for Trendsetter 400/800, AL, CL, and NEWS
• Trendsetter NEWS (MCE) Installation Guide
• Trendsetter NEWS (MCE) Rear Foot Floor Anchor Kit Installation
• Thermal 1.7 Head Installation Procedure
• TH2 Installation Procedure for Trendsetter Platesetters
• Adjusting Stitching/Geometric Correction Parameters on a TMCE or GMCE Trendsetter NEWS 200 Device
• Trendsetter AL, CL, and NEWS Processor Interface Guide
• Trendsetter NEWS MCE Preloader Interface Installation
  • Trendsetter NEWS and AL Preloader Interface Specification
• UDRC Installation Procedure
• NELA PL-T Plate Preloader Installation Guide

MPE only

• Trendsetter NEWS (MPE) Installation Guide
• Trendsetter NEWS MPE Preloader Interface Installation
  • Trendsetter NEWS and AL Preloader Interface Specification

See also

• Trendsetter 400/800/Trendsetter VLF Installation Procedure
• Test Files
• Trendsetter Disassembly Procedure
• See Assemblies page for Disassembly kits.

Site preparation

• Trendsetter NEWS Family Site Preparation Guide (GMCE)
  Chinese | Dutch | French | German | Italian | Japanese | Spanish

• Trendsetter NEWS Family Site Preparation Guide for MCE machines (no longer in production)

How to complete the site inspection checklist (PDF format):

1. Click in text fields to enter comments and click on check boxes to select them, and then print a hard copy for the customer to sign.
   OR
   Print a hard copy first, and mark the information by hand.
2. Go over the checklist with the customer and get his or her signature on the hard copy.
3. Photocopy the signed checklist and leave the copy with the customer.
4. Send the original signed copy to Sales Order Management at the address shown in the checklist.

Related Documents

• Trendsetter NEWS floor layout diagrams
• Universal Debris Removal Cabinet (UDRC) Site Preparation Guide
• Glunz and Jensen Mercury News Plate Processor Pre-Installation Guide
• Glunz and Jensen Polymer (Raptor) Plate Processor Pre-Installation Guide
• Air Compressors for Kodak Output Devices
• Procedure to test on-site air