Installation

For configuration and upgrade procedures, see the Procedures page.

Acceptance | Installation procedures | See also |Site preparation

Note: After every installation, open the Output Devices Installation Report Tool and submit the Installation Report. For instructions, see Using the Output Devices Installation Report Tool. Install the Trendsetter Installation Report Tool on the device workstation if necessary.

Acceptance

• Installation Test Procedure Checklist - GMCE
  Dutch | French | German | Italian | Spanish

How to complete the checklist (Word format):

1. Tab between fields in the Word document to check each item off and enter information.
   OR print a hard copy and mark the information by hand, then transfer it later into an electronic copy.
2. Go over the checklist with the customer and get his/her signature on a hard copy.
3. Photocopy the checklist and leave it with the customer. Keep the original for your files.
4. Attach an electronic copy of the checklist to the open call before closing it.
• Trendsetter 400/800 III base, AL, CL Installation Test Procedure
• Trendsetter 400/800 II base, AL, CL, Spectrum Installation Test Procedure
• Outputting Files for Device ITPs using Prinergy and Prinergy Evo
• ITP Test Files

Installation procedures

• Trendsetter 400/800 III Installation Procedure
  • Operator Onsite Training Checklist for Trendsetter 400/800, AL, CL, and NEWS
• Trendsetter 400/800/Trendsetter VLF Installation Procedure
• UDRC Installation Procedure
• External Chiller Installation
• Dehumidifier Unit (DHU) Installation Procedure

• Placing Plate Alignment Labels on Trendsetter 400/800 (MCE)
• Placing Plate Alignment Labels on Trendsetter 3244
  • Plate Alignment Labels
• Geometric Correction: Aligning Multiple MPE Machines in the Field

Thermal Head Installation Procedures

Thermal 1.7 Head Installation Procedure

See also

• Test Files
• Trendsetter Disassembly Procedure
  See Assemblies page for Disassembly kits.

Site preparation

• Trendsetter 400/800 III Site Preparation Guide
  Chinese | Dutch | French | German | Italian | Japanese | Spanish
  
  

How to complete the site inspection checklist (PDF format):

1. Click in text fields to enter comments and click on check boxes to select them, and then print a hard copy for the customer to sign.
   OR
   Print a hard copy first, and mark the information by hand.
2. Go over the checklist with the customer and get his or her signature on the hard copy.
3. Photocopy the signed checklist and leave the copy with the customer.
4. Send the original signed copy to Sales Order Management at the address shown in the checklist.


• Site Preparation for the Universal Debris Removal Cabinet



• Air Compressors for Kodak Output Devices
• Installing the Rx Air Pressure Sensor
• On-Site Compressed Air Qualification for Creo Output Devices 73-3624