Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
| Item | Stored Service Parts | Reference | Notes/photos |
|---|---|---|---|
| Elec Start Button | 10-4919A | DWG | |
| Backbone Reed Switch Sensor | 10-5065A | DWG | Replaces 15-3063. The 15-3063 sensor had its pin connector glued into the main body of the sensor. This connector had a tendency to separate and break the pin contacts within the sensor, sometimes causing a very intermittent failure.
The 10-5065 sensor has 110 mm of wire between the sensor body and the connector, greatly reducing the stress on the pins.  |
| Safety Interlock Reed Switch Sensor | 10-5065A | ||
| Temperature Sensor Assy | 10-0967 | temperature sensor description | |
| SIO Keyswitch | 11-0804A | SIO keyswitch description | |
| Abort Switch | 10-1338A | ||
| Table Up/Down Switch | 15-3135
15-3355 |
B279 and lower
B280 and higher (ECO D021 installed) |
|
| Omron Switch | 518-02230A | This part replaces all previous omron swithches installed on all Trendsetter VLF devices. See Omron Switch Replacement Procedure. | |
| Omron switch key | 50-1778 | For service use only. Do not send to a customer. |