Safety

Service Safety Alerts

UDRC Fire Hazard with Flexographic Media Safety Alert

Airborne Emissions Assessment Reports

Imaging System Airborne Emissions Assessment Protocol

• KPG TNPP
• Presstek Anthem 4up

FAQs

• FAQ: Emissions and ventilation related to imaging of thermal media

NVS Parameters for Presstek Anthem (MPE only)

• ei:  This NVS parameter must be set to 59 for Presstek Anthem. Do not change this value under any circumstances. If ei is not set correctly, potentially hazardous plate emissions may be released during imaging.
• dopt:  This NVS parameter must be set to 5 for Presstek Anthem or potentially hazardous gaseous emissions will be released. This parameter is password protected to avoid any customer tampering. The correct syntax is:  set media n dopt "hazardous" 5
• For more information, see Presstek Anthem on the Media site.

Restricted Access to Media Parameters (MCE only)

Special access is required to change any media parameter associated with debris removal, so that debris removal cannot be disabled inadvertently. See 34039: Restricted parameter, insufficient access level for information.