Product

Thermal 1 head

Procedure

1. Open the service access panel on the device.
2. Open the shutter. Use the command
   >> shutter open
3. Close the shutter. Use the command
   >> shutter close
4. Watch the shutter to make sure that it is functioning properly.

See also

• Shutter error—the focus sum suddenly drops to zero, the shutter is stuck, or you see error message [17686]
• Shutter sticks open, sticks closed, or does not operate smoothly
• Thermal 1/1.7 Shutter Sensor Replacement Procedure 

Technical contact(s)

Content owner: Jeff Edgar
See the Escalation page for escalation contacts.

Date submitted

25 Jan 2006