Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 2 Errorcode: [03541] Timeout waiting for the write laser

Error details | Troubleshooting information

Thermal2 Errorcode: [03541] Timeout waiting for the write laser
Thermal2 Errorcode
[03541] Timeout waiting for the write laser

Service Information The commands implemented by the exposure head are non-blocking. As a result, the command to configure the write laser control mode will only initiate the write laser control mode. This error code indicates a timeout waiting for the configuration of the write laser control mode.

Operator Action Call service.

Causes
  • The beam-pointing and / or write laser diode has not settled.

Related Documents COMMAND: sys laser state
COMMAND: sys laser [on|off]
ERRORCODE: [03540] Timeout waiting for write laser stabilization

Applies to: THERMAL2
Modified: Fri Apr 20 13:24:45 2007
Updated: Thu Jul 17 02:31:37 2008
Module: SYS

Troubleshooting information

Possible cause

  

This error may occur if the BPD does not settle fast enough.

Suggested action

  
  1. Check the BPD system.
  2. Find out if the hold current is correct.
  3. Find out if there is any other problem with the BPD system.

Related Procedure(s)

  

 

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.