Thermal3 Command: ldd current (dual|a|b) <setpoint>


Variables	setpoint	The setpoint current from 0.0 to 83.0 amps.
Description	The "Current" laser diode control mode will enable the laser power supplies, enable the beam-pointing, set the laser current(s) to 120% of the threshold current(s), detect the write laser using the beam-pointing and ramp the laser current to the setpoint current. When the laser current has reached the setpoint current, the write laser has settled.
Notes	Thermal 1.0 / 1.7x equivalents:
	The monitor command ldd current (dual\|a\|b) <setpoint> is comparable to laser current <current>.
	Thermal 2 equivalents:
	The monitor command ldd current (dual\|a\|b) <setpoint> is comparable to ldd mode current <setpoint>.
Related Documents	COMMAND: ldd cal (dual\|a\|b) <setpoint>
	COMMAND: ldd on (dual\|a\|b) <setpoint>
	COMMAND: ldd on man (dual\|a\|b) <setpoint>
	COMMAND: ldd man (dual\|a\|b) <setpoint>
	COMMAND: ldd hold
	COMMAND: ldd off
	COMMAND: ldd info