Thermal3 Command: ldd man (dual|a|b) <setpoint>


Variables	setpoint	The setpoint current from 0.0 to 83.0 amps.
Description	The "Current Manual" laser diode control mode will enable the laser power supplies and ramp the laser current to the setpoint current. When the laser current has reached the setpoint current, the write laser has settled.
	Note that the "Current Manual" laser diode control mode is intended to be identical to the "Current" laser diode control mode without requiring the presence of the PBP board and while allowing the setpoint current to be independently configured. This is intended to aid in the development and diagnosis of the exposure head and should not be used in the field.
Notes	Thermal 1.0 / 1.7x equivalents:
	The monitor command ldd man (dual\|a\|b) <setpoint> does not have an equivalent.
	Thermal 2 equivalents:
	The monitor command ldd man (dual\|a\|b) <setpoint> does not have an equivalent.
Related Documents	COMMAND: ldd cal (dual\|a\|b) <setpoint>
	COMMAND: ldd on (dual\|a\|b) <setpoint>
	COMMAND: ldd on man (dual\|a\|b) <setpoint>
	COMMAND: ldd current (dual\|a\|b) <setpoint>
	COMMAND: ldd hold
	COMMAND: ldd off
	COMMAND: ldd info