| Variables | setpoint | The setpoint power from 1.0 to 100.0 watts. |
| Description | The "Power Manual" laser diode control mode will enable the laser power supplies and ramp the laser current to the estimated current. When the laser current has reached the estimated setpoint, the write laser has settled. | |
| Note that the "Power Manual" laser diode control mode is intended to be identical to the "Power" laser diode control mode without requiring the presence of the PBP board. This is intended to aid in the development and diagnosis of the exposure head and should not be used in the field. | ||
| Notes | Thermal 1.0 / 1.7x equivalents: | |
| ||
| Thermal 2 equivalents: | ||
| ||
| Related Documents |
COMMAND: ldd cal (dual|a|b) <setpoint> | |
|
COMMAND: ldd on (dual|a|b) <setpoint> | ||
|
COMMAND: ldd current (dual|a|b) <setpoint> | ||
|
COMMAND: ldd man (dual|a|b) <setpoint> | ||
|
COMMAND: ldd hold | ||
|
COMMAND: ldd off | ||
|
COMMAND: ldd info | ||