Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [04402] The control mode is invalid

Error details

Thermal3 Errorcode: [04402] The control mode is invalid
Thermal3 Errorcode
[04402] The control mode is invalid

Service Information The monitor commands bpd on (dual|a|b), bpd hold and bpd off will set the beam-pointing control mode. This error indicates that the beam-pointing control mode is invalid.

Operator Action Call service.

Causes
  • Firmware error that will occur during firmware development and testing.

Related Documents COMMAND: bpd on (dual|a|b)
COMMAND: bpd hold
COMMAND: bpd off

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:29 2008
Updated: Wed Jul 16 04:52:19 2008
Module: BPD

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.