Thermal 3 Errorcode: [04416] The configuration is not supported


Service Information	The beam-pointing driver does not support a sensor mode of "PSD" in conjunction with a laser mode of "Dual". If this error occurs while the beam-pointing control loop is tracking the write laser(s), the beam-pointing control loop will be shutdown.
Operator Action	Change the configuration of the beam-pointing driver.
Causes	A sensor mode of "PSD" in conjunction with a laser mode of "Dual" is not supported.
Related Documents	COMMAND: bpd on (dual\|a\|b)
	COMMAND: bpd sensormode [(norm\|diff\|psd)]
	PARAMETER: bpd sensormode
	PARAMETER: ldd lasermode