Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [04004] Satellite timer stopped

Error details

Thermal3 Errorcode: [04004] Satellite timer stopped
Thermal3 Errorcode
[04004] Satellite timer stopped

Service Information An installed satellite board was not configured during Thermal 3 firmware initialization which forced the system event timer to shut down.

Operator Action Call service.

Causes
  • A hardware failure on either the head controller board or one of the satellite boards.
  • Firmware error that will occur during firmware development and testing.

Related Documents COMMAND: sat timer (enable|disable)
COMMAND: sat (install|uninstall) [<satellite>]

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:38 2008
Updated: Wed Jul 16 04:52:20 2008
Module: SAT

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.