Before downloading any 3.0 major or minor updates, the latest version of the PPU must be installed. For more information see the FAQ: Prinergy Update Utility (PPU).

Note: To install or remove any major or minor update using this PPU, the Prinergy system must be in Maintenance Mode. Placing the system in Maintenance Mode prevents backups from running while you are installing/removing updates.

Note: Prinergy 2.3 and 3.0.2.y users can upgrade directly to 3.0.3.0 using this file.

Note for users of Preflight: In Prinergy 3.0.3.0, if Preflight is on and ColorMatch is configured to convert spots to process, in some circumstances Prinergy will erroneously report the spot as being still present, although the file will be CMYK only. The workaround is to do a minimal 2nd Refine. This issue will be fixed in Prinergy 3.0.3.1.

Note: Prinergy 3.0.2.x users upgrading to 3.0.3.0 who are running or have tested Rules-Based Automation, should run the Precheck utility to check for active rules. If an active rule is found, delete the rule from your rule set before beginning the upgrade. If your Rules-Based Automation license has expired, contact the Response Center to have them delete the rule.

Note: Sites using PostScript Bypass workflow that need to export jobs to other sites are advised that the PostScript Bypass content is not included in job exports in Prinergy 3.0.3.0. This will be fixed in Prinergy 3.0.3.1.

Note: Users of Synapse Insite 4.2 PressProof and Smart Review with page RIPing - These features do not work with Prinergy 3.0.2.3 and should be fixed in the next update.

For details about this minor update, see the Prinergy 3.0.2.2 Readme.

Note: Sites running UNIX tertiaries - Jobs homed on UNIX tertiaries will not open in Workshop on OS X in 3.0.2.2. This is fixed in 3.0.2.3.

Note: Sites using "File Mover/Renamer" type Smart Hot Folders - "File Mover/Renamer" type Smart Hot Folders do not work in 3.0.2.2. ("Job Creator" type Smart Hot Folders are not affected.) This is fixed in 3.0.2.3.

Note: Warning! Do not upgrade Prinergy or Prinergy Evo sites connected to Veris 1.6 until updated Veris software is available

The Certified Process option in Prinergy 2.3.1.4, 3.0.2.2, and Prinergy Evo 3.0.0.53 does not work with Veris 1.6.904 and earlier. Do not upgrade sites to this configuration until an updated Veris software version is available. This software is expected to be available Aug. 3, 2005, and will require a service call. For more information on the issue, see the Creo Certified Process for Proofing in Creo Workflows document on the Veris Connectivity page.

This section contains information about Acrobat 7.0 plug-ins for Prinergy users for Geometry Editor, Separation Repair Tool, View Accelerator, Preflight Locator, CreoToolsPro (Trap Editor, DotShop and Separations Viewer). For detail information, see the Prinergy Acrobat Plug-ins for Adobe Acrobat 7.0 technical bulletin.

Installing the Prinergy Adobe Acrobat 7.0 plug-ins on Mac:

• In /Applications/Adobe Acrobat 7.0 Professional/, choose Acrobat 7.0 Professional and press plus I, or from the File menu, select Get Info. The Acrobat 7.0 Professional Info dialog box appears.
• Click Plug-ins. A list of installed plug-ins appears.
• Click Add. Unstuff the plugins from the file "Acro7Plugins_Mac.hqx". Browse to the location where you unstuffed the plugins and choose all plug-ins.
• Click Choose. Close the Acrobat 7.0 Professional Info dialog box. Reopen the Acrobat 7.0 Professional Info dialog box.
• Click Plug-ins to verify that the Prinergy plug-ins were installed and are listed.

Installing the Prinergy Adobe Acrobat plug-ins on PC:

• Unzip the plugins from the file "Acro7Plugins_PC.zip".
• Copy the plugins to \Program Files\Adobe\Acrobat 7.0\Acrobat\Plug_ins\Prinergy. Where: is the disk drive that Adobe Acrobat is installed on (typically c:\).

• Renaming a Prinergy 3.x Server
• Renaming a Prinergy 4.x Server

The Duplicate RSM tool merges the RSM database from one system to another. It is helpful when migrating the RSM database from Windows 2000 to Windows 2003. It also allows you to merge RSM databases across many servers for redundancy. For information on the tool, see the DuplicateRSM readme .

There is an invalid assumption in our code that eth adapter 0 will always be present in a customer's machines. If the old eth adapter is replaced by a new one, during an upgrade to Prinergy 2.2 for example, the new one may not be assigned number 0 by NetBIOS. You can use the lanacfg.exe utility to rearrange the numbering of the newly installed adapters so that adapter 0 is always present in the system. This will prevent the error message: E ... ExtremeSerialNumberFromMACAddress: NetBios NCBRESET error: rc=35

To use this utility: More...