Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Prinergy Evo Connectivity—Lotem Fiber Head

This page contains set up and configuration instructions specific to your Prinergy Evo to Lotem 400 workflow, preconfigured process templates for your Lotem 400, and additional notes, comments, and tips.

Connectivity documentation | Process Templates and Notes | Known Limitations | Resources

Device Models:

Connectivity documentation

Process Templates and Notes

Status
Known limits
Device models
Date tested
Tester
Evo version
Device RIP
RIP OS
Process Template
Notes

 

  

   

Lotem 400 Xpose

Lotem 400 Xpose  ready for MCU (60 HZ)

 

 

  		Feb 2004

 

 Tamar Kadman

 

 1.0.6.2 Lotem Xpose 1.0.47 + Upd 003 

Lotem Controller 1.60.09

  		Windows 2000 Server or Professional

Windows NT 4 Windows 95 (Lotem Contoller)

  		Pre-configured Prinergy Evo process template for output to Lotem 400 (FH)

Prinergy Evo to Lotem 400 FH Connectivity User Guide - PDF (2.3MB)

Creates a 2540 dpi LZW compressed TIFF file with Staccato screening for output to a Lotem 400 (FH).

  1. In the Lotem Expose, create templates and attach them to a hot folder.

  2. In Prinergy Evo, Process Template Editor dialog box, open this process template, and in the Processed File Preference section, select Send Processed Files to check box.

  3. In the Device Path box, browse to and select the Lotem Expose hot folder.

  4. Save the process template.
Pre-Configured Prinergy Evo process template for output to the Lotem 400 FH Prinergy Evo to Lotem 400 FH Connectivity User Guide - PDF (2.3MB)

Creates a 2540 dpi CCITTG4  compressed TIFF file with Creosettes screening and Round-Square (Euclidean) dot shapes for output to a Lotem 400 (FH).

For instructions on how to configure the process template, see Lotem 400 Expose  above.
Cnct
               CS Xpose Windows 2000 Server 

 

         
Pend
   Lotem 400 Feb 2004 Lawrence Geere 1.0.6.2 Brisque v 3.0.38  with Plate Expose AIX 4.2.1         
NT
   Lotem 800 FH                                       
NT
   Lotem 800 FH with MCU                                      
NT
   Lotem 800 FH  with DLC                                    

Known limitations

None

Resources

  • Fully supported
  • Device connectivity has been tested
  • A pre-configured process template is available
  • Pend = Tested and supported but pre-configured process templates are not currently available.

Device connectivity is not supported.

Reasons:

NT= Not tested
P = Performance problems
Cnct = Problems connecting
Qlty = Poor quality output
Pend = Not currently tested or supported but currently undergoing testing.