Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
This list may not be current. Please refer to SAP for the latest information.
See also Trendsetter base MPE cables, MCE cables
| 10-3187B | Operator Start button Assembly Drawing |
| 10-3676A | OPTO SENS, REFLECT, Picker 3 |
| 10-3679B | Table sensor, (rotator) (see FCO E897) |
| 10-3680A | Cable from AL Manifold to TEE board(J21) (TS3, TS3/8 with picker 2 or lower) |
| 10-3680B | Cable from AL Manifold to TEE board(J21) (TS3, TS3/8 with picker 3) |
| 10-3682A | Unload Table, Sensors to TEE (J6) Assembly Drawing |
| 10-3683A | OPTO Switch |
| 10-3685B | Picker II Sensor cable Assembly drawing |
| 10-3686A | Load table, Separator arms microswitch Assembly Drawing |
| 10-3687B | Load ramp sensor-TEE(J3) (see FCO E897) |
| 10-3694A | Unload Table, Rotator stepper board to TEE(J17) Assembly Drawing |
| 10-3729A | Load table, Plate sensor Assembly Drawing SA295 and lower |
| 10-3741A | Load table, Corner lights Assembly Drawing
MPE and TM466 and lower |
| 10-3773C | Unload pan, flex track (non-rotator)Assembly Drawing |
| 10-3774B | Table sensor, (non-rotator) (see FCO E897) |
| 10-3794A | Load table, Cover lock disconnect (runs inside load table) Assembly Drawing |
| 10-3800B | Load table, Cover lock relay Assembly Drawing |
| 10-4032B | TEE(J11)-PH (see FCO E897) |
| 10-4037A | Lamp relay to TEE(J24) cable |
| 10-4071A | Picker move sensor cable assembly |
| 10-4441A | TEE(J11)-PH (added on eco D282 for double plate sensing) |
| 10-4444B | AL sensors (see FCO E897) |
| 10-4580B | Unload table RH sensor (see FCO E897) |
| 10-4602B | Load ramp sensor (see FCO E897) |
| 10-4651A | Picker up and down sensors (added on ECO D548, 100 label #25) - assembly drawing. |
| 50-1616A | Picker guide cable (stainless steel), picker 2 |
| 50-1765A | Picker guide cable (stainless steel), picker 3 |
| 220-00608A | Photo interrupt sensor cable |
| 220-00733A | STATUS, LED, TM467 and higher |
| 220-00737A | GEN-STATUS LIGHTS/LOCK TM467 and higher |