Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Important: Whenever you implement
an FCO, make sure you download and install the FCO Updater Utility:
Download the latest version (12 May 08).
For more information, see FCO Updater utility.
| FCO | Component | Date | Action Required | Priority | Image |
|---|---|---|---|---|---|
| 512-00492A | Improved PDB | 13 May 08 | Install the improved PDB to prevent board burn-out due to continuous drum vacuum pump operation. | Next failure | |
| 512-00460A | One piece load roller | 7 Nov 07 | Install the improved one piece load roller to eliminate roller marks on plates during the load process. | Next failure | |
| 512-00450A | Kit FCO for Magnus 400 Conveyor | 5 Sep 07 | Install the improved middle support guide and front cover bracket to accommodate smaller plate sizes on the plate conveyor. | Next failure | |
| 512-00441A | Xpo 3.1.42 + Update 02 for Magnus 400 / Lotem 400 | 22 Apr 07 | Update 02 for Xpo 3.1.42 corrects the problem where the Xpo software stops responding after platesetter failure and goes into a loop. | Next failure | |
| 512-00422A | Installing Creo Feature Licensing Server | 20 Mar 07 | The Creo Feature Licensing (CFL) server is an integrated feature license management system that provides feature control management for multiple applications. | Next visit | |
| 512-00419A | Xpo 3.1.42 for Magnus 400 / Lotem 400 Xpose | 9 Jan 07 |
Install Xpo version 3.1.42, which supports LIF Rev C instead of the TSP data board. Note: For more information, see Xpo 3.1.42 for Magnus 400/Lotem 400 Xpose Release Notes. |
Next failure | |
| 512-00393A | Upgrade Magnus 400 (MCU-LDA) Ver 1.01.391.003 to Ver 1.02.392 | 18 Dec 06 |
Upgrade Magnus 400 (MCU-LDA)—replaces the current SED board with the SmartED_2 board and the current shortcut assembly with the improved shortcut assembly (with microswitches installed on each assembly), provides a slotted rubber tube to prevent the plates from sliding back into the cassettes, and supports the new UDRC BP configuration. Note: For more information, see Magnus 400 Controller Software Version 1.01.391.003 to 1.02.392 Upgrade Procedure. |
Next failure | |
| 512-00392A | Upgrade Magnus 400 (Manual-LDA) Ver 1.01.391.003 to Ver 1.02.392 | 18 Dec 06 |
Upgrade Magnus 400 (Manual-LDA)—replaces the current SED board with the SmartED_2 board and supports the new UDRC BP configuration. Note: For more information, see the Magnus 400 Controller Software Version 1.01.391.003 to 1.02.392 Upgrade Procedure and the Magnus 400 Controller 1.02.392 Software Release Notes and Installation Guide. |
Next failure | |
| 512-00411A | One-piece upper roller for Magnus 400 and Lotem 400 | 20 Nov 06 |
To resolve the problem of roller marks that appear on plates due to the design of the previous upper roller assembly. Attention: For platesetters released with serial number M41391 and earlier. Note: For more information, see Replacing the upper roller assembly with a one-piece upper roller on Magnus 400. |
Next failure | |
| 512-00389A | Xpo 3.00.82 for Magnus 400 and Lotem 400 Xpose | 28 Sep 06 | To improve head calibration and to enable slug exposure, install Xpo version 3.00.82. | Next failure | |
| 512-00364A | Spring spoiler for Magnus 400 | 10 Sep 06 |
The new spring spoilers correct misregistration problems and hot spots, and can accommodate different customer plate sizes and thicknesses. Note: For more information, see Replacing spring spoilers on Magnus 400 platesetters. |
Next failure | |
| 512-00319A | Update 2 and 3 for Magnus 400 Controller version 1.01.391.003 | updated 03 Jul 06 |
Update 2, which supports the new distribution head, is for the Magnus 400 Quantum platesetter. Update 2 and 3 is for the Magnus 400 platesetter with LDA head. Note: For more information, see the Update 3 for Magnus 400 Controller Software 1.01.391.003 release notes. |
Next failure | |
| 512-00323A | Xpo software version 3.00.68 | 22 Nov 05 | Install Xpo version 3.00.68 | Next failure | |
| 512-00269A | Change crossover connection cable to enable remote support | 18 Jul 05 | Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. | Next failure |