Product

Kodak^® Multi-Cassette Unit II (MCU II)

Background

To open the MCU II front door manually, or when the platesetter is turned off, you need to release the Omron^® interlock switch located in ther middle of the MCU II front door.

Requirements

Procedure

1. Open one of the side doors on the MCU II.
2. Using a 9/64-in. hex key, remove the four screws that secure the internal side cover to the mainframe, and remove the internal side cover. Set the cover aside.
   
   
   
   
3. Insert a flat-head screwdriver between the mainframe belt and mainframe until the tip of the screwdriver touches the Omron interlock switch (located in the middle of the MCU II front door).
   
   
   
   
4. Using a cross-head screwdriver, loosen the cross-head screw at the left of the groove on the interlock switch.
   
   
   
   
5. Press the tip of the flat-head screwdriver into the groove and rotate the screwdriver clockwise.
   
   
   
   
6. After the door opens, insert the tip of the screwdriver into the interlock's groove and rotate counterclockwise to return the interlock switch to its original position.

Technical contact

Content owner: Alon Davidor
See the Escalation page for escalation contacts.

Date submitted

02 Apr 2008