| Description | If the write laser is enabled in current mode, this NVS parameter specifies the write laser current. | |
| Type | Float | |
| Default Value | 15.000 Amps | |
| Range | 0.000 to 4294967.295 Amps | |
| Related Documents |
COMMAND: laser (on|off) | |
|
COMMAND: sys laser [on|off] | ||
|
PARAMETER: sys plotenable | ||
|
PARAMETER: sys laserenable | ||
|
PARAMETER: sys ignorelaser | ||
|
PARAMETER: sys powermode | ||
|
PARAMETER: sys powermonitor | ||
|
PARAMETER: sys powerloop | ||