| Description | Specifies whether plotting is enabled or disabled. | |
| If plotting is enabled ( this NVS parameter is true ), the exposure head will attempt to execute all host commands. This configuration is the default. | ||
| If plotting is disabled ( this NVS parameter is false ), the exposure head will ignore a majority of the host commands. The exposure head will ignore the write laser, stroke calibration, focus, edge detect and shutter commands as well as writes of the system parameters. Note that this configuration is intended only for debugging and / or development purposes. | ||
| Note that either the NVS parameter sys plotenable, the NVS parameter sys laserenable or the NVS parameter sys ignorelaser will disable the write laser and stroke calibration. | ||
| Type | Boolean | |
| Default Value | True | |
| Related Documents |
COMMAND: shutter (open|close) | |
|
COMMAND: laser (on|off) | ||
|
COMMAND: stroke cal | ||
|
COMMAND: sys head standby | ||
|
COMMAND: sys plot (init|start|pause|restart|stop|abort) | ||
|
COMMAND: sys laser [on|off] | ||
|
COMMAND: sys stroke cal | ||
|
COMMAND: sys focus (learn|adjust|on|off) | ||
|
COMMAND: sys edge reset | ||
|
COMMAND: sys edge [standard|featureless|off] | ||
|
COMMAND: sys shutter (open|close) | ||
|
COMMAND: sys parm [<index> <value>] | ||
|
PARAMETER: sys laserenable | ||
|
PARAMETER: sys ignorelaser | ||
|
PARAMETER: sys powermode | ||
|
PARAMETER: sys powermonitor | ||
|
PARAMETER: sys powerloop | ||
|
PARAMETER: sys lasercurrent | ||