| Description | Specifies whether the write laser is enabled in power or current mode. | |
| If the write laser is enabled in power mode ( this NVS parameter is true ), the exposure head will turn on the write laser at the specified power. The write laser power is specified either by the host command or the NVS parameters. This configuration is the default. | ||
| If the write laser is enabled in current mode ( this NVS parameter is false ), the exposure head will turn on the write laser at the specified current. The write laser current is specified by the NVS parameter sys lasercurrent. Note that this configuration is intended only for debugging and / or development purposes. | ||
| Type | Boolean | |
| Default Value | True | |
| Related Documents |
COMMAND: laser (on|off) | |
|
COMMAND: sys laser [on|off] | ||
|
PARAMETER: sys plotenable | ||
|
PARAMETER: sys laserenable | ||
|
PARAMETER: sys ignorelaser | ||
|
PARAMETER: sys powermonitor | ||
|
PARAMETER: sys powerloop | ||
|
PARAMETER: sys lasercurrent | ||