| Service Information | The beam-balance determines the stroke profiles at the maximum pixel level and the minimum pixel level. A target profile is then calculated based on the NVS parameters med <media index> beamslope <polarity>, med <media index> beamcurve <polarity>, med <media index> beampiston, med <media index> scorr <polarity / spot quad> and the stroke profiles. This error indicates that the stroke profiles at the maximum pixel level and minimum pixel level were drifting sufficiently to prevent a consistent target profile. | |
| Enabling the verbose information for the beam-balance sensor subsystem will display the results of the three coarse balance iterations and six fine balance iterations. This information will include the pixel level and errors for the final fine balance iteration. | ||
| Typically the beam-balance will succeed if the NVS parameter bbs maximumerror is increased or the NVS parameters med <media index> beamslope <polarity>, med <media index> beamcurve <polarity> or med <media index> beampiston are decreased. | ||
| Operator Action | Call service. | |
| Causes |
| |
| Related Documents |
COMMAND: bbs balance | |
|
COMMAND: vbs enable (<subsystem>|all) <level> | ||
|
PARAMETER: bbs maximumerror | ||
|
PARAMETER: med <media index> beamslope <polarity> | ||
|
PARAMETER: med <media index> beamcurve <polarity> | ||
|
PARAMETER: med <media index> beampiston | ||
|
PARAMETER: med <media index> stroke <polarity / spot quad> | ||
|
PARAMETER: med <media index> scorr <polarity / spot quad> | ||
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS