| Service Information | The beam-balance attempts to set the pixel level for all pixel quads in the stroke such that the stroke profile matches the target profile within the error configured by the NVS parameter bbs maximumerror. This error indicates that six fine balance iterations were not able to achieve a stroke profile that matches the target profile. | |
| Enabling the verbose information for the beam-balance sensor subsystem will display the results of the coarse balance and six fine balance iterations. This information will include the pixel level and errors for the final fine balance iteration. | ||
| Typically the beam-balance will succeed if the NVS parameter bbs maximumerror is increased or the NVS parameters med <media index> beamslope <polarity>, med <media index> beamcurve <polarity> or med <media index> beampiston are decreased. | ||
| Operator Action | Call service. | |
| Causes |
| |
| Related Documents |
COMMAND: bbs balance | |
|
COMMAND: vbs enable (<subsystem>|all) <level> | ||
|
PARAMETER: bbs maximumerror | ||
|
PARAMETER: med <media index> beamslope <polarity> | ||
|
PARAMETER: med <media index> beamcurve <polarity> | ||
|
PARAMETER: med <media index> beampiston | ||
|
PARAMETER: med <media index> stroke <polarity / spot quad> | ||
|
PARAMETER: med <media index> scorr <polarity / spot quad> | ||
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS