Thermal 3 Errorcode: [05649] The beam-balance has failed


Service Information	The beam-balance has failed.
	Due to limitations of the Thermal 1.0 / 1.7x interface, the number of error codes that can be returned to the host are limited. Enabling the error translation level for the system subsystem will display a more specific error.
Operator Action	Increase the maximum allowable error. If beam-balance problems persist, call service.
Causes	The beam-balance sensor is detecting insufficient signal. The beam-balance is prevented by the range of pulse heights. The beam-balance is prevented by drift errors. The beam-balance error exceeds the maximum error.
Related Documents	COMMAND: sys stroke cal state
	COMMAND: sys stroke cal
	COMMAND: vbs enable (<subsystem>\|all) <level>
	ERRORCODE: [06418] Insufficient signal for the beam-balance
	ERRORCODE: [06415] Beam-balance prevented by the range of pulse heights
	ERRORCODE: [06416] Beam-balance prevented by drift errors
	ERRORCODE: [06417] Beam-balance error exceeds the maximum error
	PARAMETER: bbs maximumerror