Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Important: Whenever you implement
an FCO, make sure you download and install the FCO Updater utility:
Download the latest version (12 May 08).
For more information, see FCO Updater utility.
| FCO | Component | Date | Action Required | Priority | Image |
|---|---|---|---|---|---|
| 512-00461A | Bar Flag | 01 Oct 07 | Install the improved bar flag to prevent scratches on plates. | Next failure | |
| 512-00412A | Tweezers assembly | Updated 12 May 08 |
Improves slip sheet picking performance and enables the XY bar to successfully transport the slip sheet to the disposal bin. |
Next failure | |
| 28818 | Short pin assembly | 19 Sep 05 | Replace short pin assembly with updated version to prevent small plates for becoming stuck. | Next failure |  |
| 512-00221A | Modified plate support Wheel | 10 Jan 05 | Replace the support wheels nearest the drum with smaller wheels that do not prevent the plate from approaching the drum for loading. | Next visit |  |
| 512-00213A | Suction cup assembly | 16 Nov 04 | Install suction assembly type II with suction cups that can be replaced by the customer without need for a service call. | Next visit | |
| 512-00139B / 512-00140B | Paper/plate separator assembly | 15 Jun 04 | Install a paper/plate separator assembly on the front inner edge of the cassettes to prevent the XY bar from picking up multiple plates | Next failure |  |
| 512-00207A | Wide paper/plate detector | 11 Feb 04 | Replace the existing paper/plate detector with the new one which can detect a wide range of plates without the need for calibration. | Next visit |
|
| 03108 03108A |
Vacuum system assembly | 20 Oct 03 | Install new vacuum system assembly with new barflag location to prevent plate bending, disposal rubber damage, and intermittent error message that vacuum does not grab plate. | Next failure |  |
| 01636 | Antistatic Bar Flag Assembly | 12 Jun 03 | Add a grounding cable to the loading system bar to prevent electrostatic electricity from plates/paper harming bar flag detector through anodized bar flag and causing problems such as "Right/left local does not respond." | Next visit |  |
| 01213 | Paper disposal roller bar flag | 04 Jun 03 | Replace disposal roller with updated version to prevent the bar flag from cutting grooves into the rubber, which can lead to hot spots. | Next visit |  |
