Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Important: Whenever you implement
an FCO, make sure you download and install the FCO Updater utility:
Download the latest version (12 May 08).
For more information, see FCO Updater utility.
Find FCOs according to: Date | Assembly | Next visit | Next failure
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| FCO 512-00411A | One-piece upper roller for Magnus 400 and Lotem 400 |
20 Nov 06
|
To resolve the problem of roller marks that appear on plates due to the design of the previous upper roller assembly. Attention: For platesetters released with serial number M41391 and earlier. Note: For more information, see Replacing the upper roller assembly with a one-piece upper roller on Magnus 400 and Lotem 400. |
next failure | |
| 512-00269A | Change crossover connection cable to enable remote support |
24 Jun 05
|
Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. | next failure | |
| 512-00237A | Update 3.1 |
21 Feb 05
|
To increase throughput and improve plate separation, install update 3.1 for version 1.50.08. | next failure | |
| 512-00202A | Unload tray upper rollers |
08 Dec 04
|
To resolve photoactivity or pressure marks on Kodak plates, replace the upper rubber unload rollers with Delrin® rollers. | next failure |  |
| 512-00141A | Accessories CD |
05 Aug 04
|
Install the support tools on the accessory CD to improve the support of the Lotem devices. | next failure | |
| 512-00133A | Replacing tail gripper shoulder screws |
03 Aug 04
|
To prevent the tail gripper shoulder screws from becoming loose and falling off, replace them with self locking screws. | next visit |  |
| 512-03285A | Resolving Local3 board does not respond
error message |
01 Feb 04
|
To prevent the Local3 board does not respond
error message, add a capacitator to the reset circuit of the Local3 board |
next failure | |
| FCO 512-00099A | Lotem Controller version 1.50.08 |
31 Dec 03
|
To enable support for diagnostics, ASC, and small plates, and to resolve 13 issues and bugs, install version 1.50.08 | next failure | |
| 512-03310A | Power Fail Protector |
09 Dec 03
|
To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in OFF status until the On/Off pushbutton is toggled. | next visit |  |
| 512-02139A | Local3 board error |
updated 18 Nov 03
|
Prevent Local3 board error messages caused by conflicting components by connecting a closed circuit connector to each of the Local3 boards. | next visit |  |
| 512-00470 | Carriage amplifier replacement |
25 Feb 03
|
Replace the J1 and the J3 connectors to improve the power supply to the carriage amplifier board. | Next Visit |  |
| 512-01395 | Debris removal air pressure sensor connection |
27 Nov 02
|
Connect the debris removal air pressure sensor tube to the MCE board to monitor the UDRC flow rate. | Next Visit |
Connectivity | Debris removal | Drum | Electronics | Software
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-00269A | Change crossover connection cable to enable remote support | 24 Jun 05 | Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. | next failure |
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| 512-01395 | Debris removal air pressure sensor connection | 27 Nov 02 | Connect the debris removal air pressure sensor tube to the MCE board to monitor the UDRC flow rate. | Next Visit |
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| 512-00133A | Replacing tail gripper shoulder screws | 03 Aug 04 | To prevent the tail gripper shoulder screws from becoming loose and falling off, replace them with self locking screws. | next visit | |
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| 512-03285A | Resolving Local3 board does not respond
error message |
01 Feb 04 | To prevent the Local3 board does not respond
error message, add a capacitator to the reset circuit of the Local3 board |
next failure | |
| 512-03310A | Power Fail Protector | 09 Dec 03 | To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in OFF status until the On/Off pushbutton is toggled. | next visit | |
| 512-02139A | Local3 board error | updated 18 Nov 03 | Prevent Local3 board error messages caused by conflicting components by connecting a closed circuit connector to each of the Local3 boards. | next visit | |
| 512-00470 | Carriage amplifier replacement | 25 Feb 03 | Replace the J1 and the J3 connectors to improve the power supply to the carriage amplifier board. | Next Visit | |
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| 512-00237A | Update 3.1 | 21 Feb 05 | To increase throughput and improve plate separation, install update 3.1 for version 1.50.08. | next failure | |
| 512-00141A | Accessories CD | 05 Aug 04 | Install the support tools on the accessory CD to improve the support of the Lotem devices. | next failure | |
| FCO 512-00099A | Lotem Controller version 1.50.08 |
31 Dec 03 | To enable support for diagnostics, ASC, and small plates, and to resolve 13 issues and bugs, install version 1.50.08 | next failure |
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| 512-00133A | Replacing tail gripper shoulder screws | 03 Aug 04 | To prevent the tail gripper shoulder screws from becoming loose and falling off, replace them with self locking screws. | next visit | |
| 512-03310A | Power Fail Protector | 09 Dec 03 | To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in OFF status until the On/Off pushbutton is toggled. | next visit | |
| 512-02139A | Local3 board error | updated 18 Nov 03 | Prevent Local3 board error messages caused by conflicting components by connecting a closed circuit connector to each of the Local3 boards. | next visit | |
| 512-00470 | Carriage amplifier replacement | 25 Feb 03 | Replace the J1 and the J3 connectors to improve the power supply to the carriage amplifier board. | Next Visit | |
| 512-01395 | Debris removal air pressure sensor connection | 27 Nov 02 | Connect the debris removal air pressure sensor tube to the MCE board to monitor the UDRC flow rate. | Next Visit |
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| 512-00269A | Change crossover connection cable to enable remote support | 24 Jun 05 | Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. | next failure | |
| 512-00237A | Update 3.1 | 21 Feb 05 | To increase throughput and improve plate separation, install update 3.1 for version 1.50.08. | next failure | |
| 512-00141A | Accessories CD | 05 Aug 04 | Install the support tools on the accessory CD to improve the support of the Lotem devices. | next failure | |
| 512-03285A | Resolving Local3 board does not respond
error message |
01 Feb 04 | To prevent the Local3 board does not respond
error message, add a capacitator to the reset circuit of the Local3 board |
next failure | |
| FCO 512-00099A | Lotem Controller version 1.50.08 |
31 Dec 03 | To enable support for diagnostics, ASC, and small plates, and to resolve 13 issues and bugs, install version 1.50.08 | next failure |