Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS


MCE Power Box

Note: Serial numbers start with NM

Boards | Diagrams and Schematics | Description | Parts | Photographs | Power Supplies | Safety Loop

Description

Boards

Power Supplies

All power supplies are connected to the PDB. Power is supplied from the PDB to the various components such as MCE and GENINE boards via the CAN Bus.

There are 4 power supplies for MCE devices:

See PDB Board Wiring Diagram - page 5 , (contains a POWER SUPPLY ALLOCATION TABLE at the bottom of the page with more information on the above power supplies)

Safety Loop

See Safety Circuit Wiring Diagram - page 4

When servicing the device, a Power Box Disconnect Switch Service Override tool (15-3526) is needed to turn the power on when the inner access panel has been removed.

Parts

See Trendsetter NEWS MCE Assemblies page for assembly drawings and BOMs.

See Trendsetter NEWS MCE Parts page for cable and spares lists.

Photographs

Diagrams and Schematics

The TSM Wiring, Safety, and Block Diagrams are in one large pdf file. Check the page number listed below for the diagram you want to see. Once you have opened the PDF file, you can use the bookmarks on the left side to go to the diagram you want.


    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.