Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Important: Whenever you implement
an FCO, make sure you download and install the FCO Updater utility:
Download the latest version (12 May 08).
For more information, see FCO Updater utility.
| FCO | Component/Activity | Date | Description | Priority | Picture |
|---|---|---|---|---|---|
| 512-00506A | Controller version 2.03.355.003 | For devices with Windows® XP: Helps prevent error messages concerning startup log and calibrating and exposing TIFF files in a resolution of 2400; supports S300 devices. | Next visit | ||
| 512-00466A | UDRC upgrade | 06 Mar 08 | Kodak no longer supplies the Fuchs debris removal system. Discuss the best Universal Debris Removal Cabinet (UDRC) solution with your customer, and then order the required UDRC. | Next failure | |
| 512-00454A | Optic Lens 1:3 | 12 Feb 08 | The optic lens 1:3 assembly supports the offset option without reducing throughput for flexo plates, makes calibration easier, and in some cases, improves image quality. | Next failure | |
| 512-00425A | UDRC Sensor | 20 Dec 07 | In case of a UDRC malfunction, the UDRC vacuum sensor causes ThermoFlex Controller to generate a warning, and reduces filter waste. | Next visit | |
| 512-00479A | Controller version 1.32.350.004 (for Win® 95) | 24 Oct 07 | Controller version 1.32.350.004 supports the UDRC vacuum sensor and reduced minimum drum speed, in addition to other improvements. | Next failure | |
| 512-00455A | Auto Opening Top Door | 25 Sep 07 | Replace the top door solonoid locking assemblies to enable the top door to open automatically from ThermoFlex Controller. | Next failure | |
| 512-00464 | Controller version 2.02.354.005 (for Win® XP) | 11 Sep 07 | Controller version 2.02.354.005 supports 24, 32, and 48 beams and reduced minimum drum speed. | Next failure | |
| 512-27688 | L400 Top Door "Lift O Mat" | 17 Nov 05 for Flexo Narrow | The Lift O Mat assembly has a stronger piston to support and hold the top back door of the platesetter open. | Next failure |  |
| 512-00269A | Change crossover connection cable to enable remote support | 24 Jun 05 | Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. | Next failure | |
| 512-00274A | Version 1.31.350.002 | 05 May 05 | Controller version 1.31.350.002 enables support for diagnostics and remote support for ThermoFlex Mid II and Narrow. | Next visit | |
| 512-00272A | Sealing the optic house opening |
18 Apr 05
|
Prevent dust from reaching the laser optics by sealing the opening where the resolution mechanism fork enters the optic house. |
Next failure one full work day |
 |
| 512-00141A | Accessories CD | 07 Nov 04 | Install the support tools on the accessories CD to improve support of the ThermoFlex device |
Next failure
|
|
| 512-01965 | Version 1.20.12 | Release note | |||
| 512-03285A | Local3 box assembly | 01.02.04 | Prevent the Local3 board does not respond error
message, by adding a capacitor to the Local3 board's reset circuit. |
Next failure
|
|
| 512-03310A | Power surge protector | 04.12.03 | To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in an Off status until the On/Off pushbutton is toggled. | Next Visit | |
| 512-02139A | Local3 board | 18.09.03 | Connect a closed circuit connector to the Local3 boards in order to prevent two conflicting components within the platesetter from generating the Interlock is Open error message. | Next Visit |