Field Change Orders (FCOs)

Important: Whenever you implement an FCO, make sure you download and install the FCO Updater utility: Download the latest version (12 May 08).
For more information, see FCO Updater utility.

FCO	Component/Activity	Date	Description	Priority	Picture
512-00511A	Slow motor belt tension assembly	01 Jul 08	For Mid II: Reduces noisy operation of the clutch system and help prevent the clutch shaft from breaking.	Next visit
512-00506A	Controller version 2.03.355.003		For Mid II with Windows® XP: Helps prevent error messages concerning startup log and calibrating and exposing TIFF files in a resolution of 2400; supports S300 devices.	Next visit
512-00466A	UDRC upgrade	06 Mar 08	Kodak no longer supplies the Fuchs debris removal system. Discuss the best Universal Debris Removal Cabinet (UDRC) solution with your customer, and then order the required UDRC.	Next failure
512-00477A	Drum driver and distribution board	03 Mar 08	To resolve error message "Drum go to position" or "Speed time out", replace the drum driver and distribution board.	Next failure
512-00454A	Optic Lens 1:3	12 Feb 08	The optic lens 1:3 assembly supports the offset option without reducing throughput for flexo plates, makes calibration easier, and in some cases, improves image quality.	Next failure
512-00425A	UDRC Sensor	20 Dec 07	In case of a UDRC malfunction, the UDRC vacuum sensor causes ThermoFlex Controller to generate a warning, and reduces filter waste.	Next visit
512-00479A	Controller version 1.32.350.004 (for Win® 95)	24 Oct 07	Controller version 1.32.350.004 supports the UDRC vacuum sensor and reduced minimum drum speed, in addition to other improvements.	Next failure
512-00464	Controller version 2.02.354.005 (for Win® XP)	11 Sep 07	Controller version 2.02.354.005 supports 24, 32, and 48 beams, has reduced minimum drum speed, and online help for ThermoFlex Mid II.	Next failure
512-00386A	Anti-noise Foam Kit	01 Nov 06	To reduce noise during platesetter operation, install foams on doors and panels.	Next failure
512-00336A	Replacing the slow motor (clutch) assembly.	10 Jan 06	To prevent the clutch from sliding and stopping the drum rotation for loading, replace the clutch assembly.	Next failure
512-00304A	Adapting to cTUVus regulations	11 Sep 05	To adapt the platesetter to cTUVus regulations, install the relevant parts and add the relevant safety labels.	For six customers only, check befor ordering
512-00269A	Change crossover connection cable to enable remote support	24 Jun 05	Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection.	next failure
512-00274A	Version 1.31.350.002	05 May 05	Controller version 1.31.350.002 enables support for diagnostics and remote support for ThermoFlex Mid II and Narrow.	Next visit
512-00272A	Sealing the optic house opening	18 Apr 05	Prevent dust from reaching the laser optics by sealing the opening where the resolution mechanism fork enters the optic house.	next failure one full work day
512-00141A	Accessories CD	07 Nov 04	Install the support tools on the accessories CD to improve support of the ThermoFlex device	Next failure
512-01965	Version 1.20.12		Release note
512-03285A	Local3 box assembly	01.02.04	Prevent the Local3 board does not respond error message, by adding a capacitor to the Local3 board's reset circuit.	Next failure
512-03310A	Power surge protector	04.12.03	To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in an Off status until the On/Off pushbutton is toggled.	Next Visit
512-02139A	Local3 board	18.09.03	Connect a closed circuit connector to the Local3 boards in order to prevent two conflicting components within the platesetter from generating the Interlock is Open error message.	Next Visit

 

FCOs archive