Magnus VLF Autoloader - Engine Parts

Home | Contact Us | Submit Troubleshooting Info | Search | Help

Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Parts - Engine

See also Cylinders | Sensors and switches | Engine theory | Electronic registration theory | Plate flyoff

5183 engine: 50-2575B BOM | DWG
5983 engine: 11-1098A BOM
6383 engine: 500-00151B BOM | DWG

Backbone | Ballscrew | Balance Weights | Drums | Encoder | Manifold | Rear Fans | Rollers | TEC/LEC

Backbone Mechanism

Item	Stored Service Parts	Reference	Notes/photos
TEC/LEC Backbone	50-2588C	BOM \| DWG
Floating end block, TE backbone	500-00583A	DWG
Fixed end block, TE backbone	500-00584A	DWG
Registration Probe Assembly Registration probe Registration continuity switch	500-02855A 11-1122C 500-00855A	BOM (FRU) \| DWG BOM \| DWG BOM (FRU) \| DWG	Installed on the LEC backbone. See also the Registration page.

TEC & LEC (Trailing Edge/Leading Edge Clamps)

Item	Stored Service Parts	Reference	Notes/photos
TEC coil, backbone	10-9052A
TEC clamp	50-2517B	BOM \| DWG
TEC actuator	50-2739A	BOM \| DWG
LEC Assembly	50-2574	DWG
LEC Push Pin Down Plate, Reg Mod	500-00855A	BOM DWG 500-00855A
LEC Springs	59-3240
Pole Pusher Assembly on TE Clamp	500-00283A	BOM \| DWG
LEC actuator ball	252-01029A	DWG 50-2588C item 330	Part of backbone mechanism - 50-2588C. See FCO CA07638 for kit and procedure.
LEC opener pin	252-01017A	DWG 50-2588C item 340	Part of backbone mechanism - 50-2588C. See FCO CA07638 for kit and procedure.

Ballscrew Assembly

Item	Stored Service Parts	Reference	Notes/photos
Ballscrew with ballscrew nut	354-00009	5183 - 50-2512A item 240 6383 - 500-00306A item 370	When replacing the ballscrew, also replace the end support bracket and roller bearing (500-00027) and the carriage stepper motor drive (50-2677). The ballscrew and roller bearing (368-00018) must be pre-assembled before being shipped.
Ballscrew end support assembly	500-00027A	DWG 50-2512A item 370	This is the home side bearing assembly. Includes end support bracket (57-9960A) and roller bearing (368-00018). The roller bearing must be assembled on the ballscrew before being shipped.
Ballscrew cart assembly	50-2676A	BOM \| DWG 50-2512A item 410
Ballscrew nut cart	252-09999A	50-2676A item 20
Carriage stepper motor drive	50-2677A	BOM DWG	This assembly includes the away side bearing, carriage motor, and fan assemblies.
Ballscrew away side bearing assembly	518-02429A		Procedure: Replacing the carriage ballscrew away side bearing assembly

Balance Weights

Item	Stored Service Parts	Reference	Notes/photos
Drum Balancer Actuator	50-2557A	BOM \| DWG
Drum Balancer Assembly	50-2529C	BOM \| DWG	Higher level BOM - 50-2589
Drum balancer core assembly	500-02142A	BOM \| DWG	Higher level BOM - 50-2529
Home Balance Weights (encoder side)	50-2190A	Drawing
Away Balance Weights (motor side)	50-2191A	Drawing

Drums

Item	Stored Service Parts	Reference	Notes/photos
5983 drum	11-1098A	BOM

6383 Drums

Item	Stored Service Parts	Reference	Notes/photos
6383 drum w/ balancers	500-00171A	BOM \| DWG
6383 machined drum	252-00538B-A
6383 drum motor assembly	50-2561A	BOM \| DWG	Contains drum motor (15-3530) and pulley (54-4254)
6383 drum belt	54-4256
Drum registration contact block	50-2643B	DWG	See Registration page.
Drum blackening kit	518-02545A		Contains marker (690-01270) and drum blackening instructions in Edge Detect Camera Installation and Calibration. See also troubleshooting item.
Drum dowel pins (M3x10)	52-4605	500-00172A item 50	The TECs push against these pins in the park position.

5183 Drums

Item	Stored Service Parts	Reference	Notes/photos
5183 drum w/balancers	50-2589A	BOM \| DWG
5183 machined drum	57-9426B-A
5183 drum motor assembly	500-01253A	BOM \| DWG	Contains drum motor (15-3530) and pulley (54-4254)
5183 drum belt	54-3255
Drum registration contact block	50-2643A	DWG	See Registration page.
Drum blackening kit	518-02545A		Contains marker (690-01270) and drum blackening instructions in Edge Detect Camera Installation and Calibration. See also troubleshooting item.
Drum dowel pins (M3x10)	52-4605	50-2566A item 50	The TECs push against these pins in the park position.

Encoder

Item	Stored Service Parts	Reference	Notes/photos
Heidenhain encoder (includes encoder cable)	507-00174A	BOM \| DWG Magnus VLF Autoloader wiring diagrams, sheet 8

Manifold

Item	Stored Service Parts	Reference	Notes/photos
Engine Manifold	50-2654	BOM DWG Pneumatic schematic 718-00023G	Valves: "roller on/lock/off" unused Head air, safeties "tec unlock" Release Enable "balancer extendaway" "balancer extendhome" "platedoor open" Backbone horiz/lock/tilt "debris airjet on" Backbone unload/lock/load LEC lock "headstage unlock" LEC/TEC on/lock/off [Names in quotation marks are identical to the firmware command.]
Single action soledoid valve, 24VDC	55-0771
Double action solenoid valve, 24VDC	55-0989

Rear Fans

Item	Stored Service Parts	Reference	Notes/photos
Field upgrade kit (51 in.)	512-00357A	BOM
Field upgrade kit (63 in.)	512-00362A	BOM
Common fan assembly	500-03553A	BOM \| DWG
Fan motor assembly	10-4143A	BOM \| DWG
Magnetic latch	500-03560A		Consists of two magnets (59-4024) and bracket (252-10480A).
Rear fan air filter (two per device)	328-00036		Install the filter with the wire mesh towards the output device.

Rollers

See also Roller Theory

Item	Stored Service Parts	Reference	Notes/photos
Roller Backbone Assembly Center roller Outer roller	500-00311A 252-00604A 252-00605A	BOM \| DWG item 50 item 60	one piece two pieces
Roller shims (0.3mm)	252-09158A		Used for backbone bow adjustment.

Popups / Tool Tips for this Page

To determine which drum amplifier is currently installed, in Service Shell type >>set drum drvdir. CIL amp: >>set drum drvdir – 0 ; Automotion amp: >>set drum drvdir – 1

Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.