Trendsetter VLF - Assemblies

Home | Contact Us | Submit Troubleshooting Info | Search | Help

Assemblies - Engine

5080 encoder end (50-1235) BOM | Drawing
5080 pulley end (50-1236) BOM | Drawing
5880 encoder end (50-1318) BOM | Drawing
5880 pulley end (50-1319) BOM | Drawing

Pulley end balancer detent module (50-2399) BOM

Drum

[drum description]

5080 Drum Assembly—50-1234C
Drawing | BOM

5080 EM Drum Drive—11-0427
Drawing | BOM

5880 Drum Assembly—50-1289C
Drawing | BOM

5880 EM Drum Drive—11-0447
DWG | BOM

Edge Detection Strip-57-4224

[edge detection strip description]

Leading Edge Clamp Assembly-50-1372B

Drawing | BOM
[lec description]

Clamps

57-5599A for the two clamps above the registration blocks with two holes (pins 1 and 3)
Each clamp must have two dowels (52-4343) installed with loctite 609 (89-0044) before shipping. Order FRU 500-07466A.

57-5600A for the two clamps above the registration blocks with one hole (pins 2 and 4)
Each clamp must have two dowels (52-4343) installed with loctite 609 (89-0044) before shipping. Order FRU 500-07465A.

57-3388A for the other six clamps
Each clamp must have two dowels (52-4343) installed with loctite 609 (89-0044) before shipping. Order FRU 500-07468A.

57-2077B fabricated leading edge pivot block (10 pieces)

52-4412 M5x25 countersunk screw (10 pieces)

59-3240 Springs (four pieces for each clamp)

57-3390A Spring holders (four pieces for each clamp)

Clamp Plates

50-1413B 5880 pulley end

50-1414B 5080 pulley end Drawing

50-1415A 5080 encoder end Drawing

50-1416A 5880 encoder end Drawing

Nylon block-57-2077B

Backbone reed switches

59-3141 (magnet)

10-5065A (sensor)
Replaces 15-3063. See the Sensors and Switches page for details.

Pneumatic cylinders-55-0079

Plate Flyoff Detector

[flyoff description]

Plate Flyoff Detector components are included in the following BOMs:

5080 Engine - Drawing | BOM (items 0470 to 0610)
5880 Engine - Drawing | BOM (items 0470 to 0610)

The DWGs shown below are referenced in the Laser Plate FLyoff Detector Installation document and include only the Plate Flyoff Detector components:

77-0036 pulley end Drawing
77-0037 encoder end Drawing

Upgrade kits - see ECO B573:

5080 Engine - 05-0034
5880 Engine - 05-0035

Electronic Registration

Replacement kit: 05-0143

10-4007 Cable, REG PINS-DIS
13-4882 Electrode, spring-loaded
18-3211 Cable, tie mount, barbed, black

Registration Blocks

[registration block description]

57-4960 registration block
57-4545 registration pin

Roller Assembly-50-1224B

Drawing | BOM
[roller assembly description]

02-4270A Drum roller upgrade kit
Kit contains 50-1519A (center roller assembly) and 50-1518A (outer roller assembly).

Clamp Plates

50-1413B 5880 pulley end

50-1414B 5080 pulley end Drawing

50-1415A 5080 encoder end Drawing

50-1416A 5880 encoder end Drawing

Roller backbone pneumatic cylinders

55-0281 (2.5" x 1¼") Round body used on B1 to B120

55-0649 (1.5" x 1.5") Square body used on B121+

Backbone reed switches

59-3141 (magnet)

10-5065A (sensor)
Replaces 15-3063. See the Sensors and Switches page for details.

Trailing Edge Clamp Assembly-50-1223C

Drawing | BOM
[tec description]

TEC Lock/Unlock Assembly - 11-0890
BOM

Clamps - 50-2374A
BOM | DWG

Clamp Plates

50-1413B 5880 pulley end

50-1414B 5080 pulley end Drawing

50-1415A 5080 encoder end Drawing

50-1416A 5880 encoder end Drawing

TEC backbone pneumatic cylinders-55-0282 (3" x 2¼")
Item 0160: Drawing | BOM

Park bars-57-4520A

TEC lock/unlock pneumatic cylinder-55-0535

Rod end bearing block-57-3442

Temperature Sensors

[temperature sensor description]

Temperature sensor assembly-10-0967

Assemblies - Engine

5880 Engine—50-1401B