Poor image quality is obtained when you use ThermoFlex TIFF FE software to expose offset plates on ThermoFlex Hybrid platesetter, because the ThermoFlex TIFF FE software is not updated with the offset plate parameters. Find a solution under Application problems on the Troubleshooting page.

ThermoFlex TIFF FE 3.00.83 has been released to EP. Find the product description on the Overview page. Xpo_3.00.83_TTFE.zip is available and can be found together with ThermoFlex TIFF FE 3.00.83 Release Notes under Installers on the Downloads page. An updated ThermoFlex TIFF FE 3.1 Installation Guide can be found on the Installation page.

When installing ThermoFlex TIFF FE and TIFF Assembler Plus software, error messages related to Aladdin device driver appear. Find this item on the Troubleshooting page.

Error message “Cannot find hotfolder.ans file” during Xpo installation, and you cannot start the software. Find a solution under Installation on the Troubleshooting page.

A WebEx session describing ThermoFlex TIFF FE and/or TIFF Assembler Plus will be conducted once a month. Find details under WebEx on the Reference page.

The ThermoFlex TIFF FE for ThermoFlex Mid/Narrow Devices - Getting Started, ThermoFlex TIFF FE for ThermoFlex Wide and Trendsetters NX Devices - Getting Started, and TIFF Assembler Plus - Getting Started illustrate the getting started sequence when using the software. These items are posted under Getting started on the Reference page.

Although it is installed, Copydot Toolkit cannot be launched from ThermoFlex TIFF FE launchpad. Find a solution under Application problems on the Troubleshooting page.

Two technical bulletins: Using the TIFF Assembler Plus Software With ThermoFlex Mid/Narrow Devices and Using the TIFF Assembler Plus Software With ThermoFlex Wide Devices are posted under Technical bulletins on the Reference page.

TIFF Assembler Plus has been released to EP. The TIFF Assembler Plus update for ThermoFlex TIFF FE ( TIFFAssemblerPlusUpd.zip ) and its TIFF Assembler Plus Update readme can be found on the Downloads page. An updated TIFF Assembler Plus 1.0 Release Notes is posted on the Reference page.

ThermoFlex TIFF FE has been released to EP. xpo_3.00.68_TTFE.zip is available and can be found together with ThermoFlex TIFF FE 3.00.68 release notes under Installers on the Downloads page. An updated ThermoFlex TIFF FE 3.1 Installation Guide can be found on the Installation page, and an updated ThermoFlex TIFF FE 3.0 online help can be found on the Reference page.

TIFF Assembler Plus is currently in Beta, and is supplied with the ThermoFlex TIFF FE software for all ThermoFlex configurations. The product description can be found on the Overview page. The TIFF Assembler Plus 1.0 Release Notes and the TIFF Assembler Plus Online Help are posted on the Reference page. The troubleshooting item: Error: “Failed to start the Aladdin device driver” on Windows XP with SP2 is posted on the Troubleshooting page.

ThermoFlex TIFF FE version 3.00.37 is released and can be found together with the ThermoFlex TIFF FE Release notes under Installers on the Downloads page.

ThermoFlex TIFF FE version 3.00.36 has been released to EP. Find an updated ThermoFlex TIFF FE 3.1 Installation Guide on the Installation page.

New plate sets do not appear in ThermoFlex TIFF FE application. Find a solution to this problem under Application problems on the Troubleshooting page.

When you do not have an IP address for the ThermoFlex device, you can open the application in simulation mode. Find this item on the Procedures page.

How to create log files when there are application problems can be found under Application problems on the Troubleshooting page and on the Procedures page.

During configuration, the TSP cannot be detected and the configuration fails. Find this item under Configuration on the Troubleshooting page and on the Procedures page.

ThermoFlex TIFF FE 3.0 online help. To start the help system, extract the zip file and double-click 'index.htm'. This item can be found on the Reference page.

ThermoFlex TIFF FE version 3.00.36 is currently in Beta. The product description can be found on the Overview page. Installation procedures can be found in the ThermoFlex TIFF FE 3.1 Installation Guide on the Installation page. Connectivity to output devices and relationships to other products can be found on the Connectivity page. The escalation process for this product can be found on the Escalation page.