dio delay	Set the maximum stabilization delay.
dio idle	Set the diode idle current.
dio limit	Set the diode current limit.
dio override (<diode>|all)	Override the diode(s) current limit.
dio pix_delay (<diode>|all)	Set the diode(s) pixel delay.
dot ontime	Diode odometer.
dpc <copy> current_points	Diode current for the latest diode power curves.
dpc <copy> original_current_points	Diode current for the original diode power curves.
dpc <copy> original_power_points	Output power for the original diode power curves.
dpc <copy> power_points	Output power for the latest diode power curves.
dps gain	Power sensor gain values, set during manufacturing.
foc a1
foc a2
foc a3
foc a4
foc actmode
foc actuatorlut
foc dmodsync
foc edgespotwidth
foc effectivegaplut
foc errorcal
foc fca1
foc fca2
foc fca3
foc fca4
foc fck1
foc fck2
foc fcki
foc fkd
foc fki
foc fkp
foc forcecontrollut
foc k1
foc k2
foc ki
foc learngain
foc lpos
foc lposcal
foc maxlearnsize
foc offset
foc padvance
foc stricterrorcheck
foc tfuture
h1c brt	Delay required before initiating a beam-balance.
h1c lrt	Delay required before launching the first image.
h1c sssa	Component of sub-scan shift adjust dependent on the exposure head.
log autolog
log delay	Configure the trigger delay.
log divisor <index>	Configure the divisor for the sample points.
log maximumsize
log state <index>	Enable / disable the sample points.
log trigger	Configure the trigger event.
med <media index> agcenable	Enable or disable the AGC system.
med <media index> agcsamples	The number of samples to collect for AGC evaluation.
med <media index> agcsum	The target sum for the AGC system.
med <media index> calibrate	The stroke calibration flag for the media.
med <media index> colour	The media colour for identifying media.
med <media index> currents <diode>	The current table for the media.
med <media index> drumspeed	The drum speed for the media.
med <media index> focusmode	The focus mode for the media.
med <media index> imagemode	The image mode for identifying media.
med <media index> name	The media name for identifying media.
med <media index> rcvrgain	The focus laser receiver gain for the media.
med <media index> sd	The surface depth of the media.
med <media index> sensitivity	The sensitivity for the media.
med <media index> sensitivityadjust	The sensitivity adjustment for the media.
med <media index> sr	The surface reflectivity of the media.
med <media index> stroke <diode>	The power table for the media.
med <media index> surfacevelocity	The surface velocity for the media.
sys dpi	Image DPI.
sys edge_comp	Edge compensation for plotting.
sys firmwareversion	The current firmware version.
sys mask <diode>	Diode mask for plotting.
sys pix_boost	Imaging boost for pixels with no mainscan neighbours.
sys SerialNumber	Head serial number.
sys soffset	Head stroke offset.
sys swidth	Head stroke width.
thk <index> thickness	The hard-coded media thicknesses.
thk <index> thk_delay (<row number>|all)	Set the thickness-based pixel delay for the diode row(s).
vbs level <subsystem>	The verbose level for all subsystems.
vpc <media> power_points	Power points for the media's velocity power curves.
vpc <media> velocity_points	Velocity points for the media's velocity power curves.