Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Important: Whenever you implement
an FCO, make sure you download and install the FCO Updater utility:
Download the latest version (12 May 08).
For more information, see FCO Updater utility.
Find FCOs according to: Date | Assembly | Next visit | Next failure
|
FCO |
Description |
Date |
Action Required |
Priority |
Illustration |
|---|---|---|---|---|---|
| FCO 512-00441A | Xpo 3.1.42 + Update 02 for Magnus 400 / Lotem 400 | 22 Apr 07 | Update 02 for Xpo 3.1.42 corrects the problem where the Xpo software stops responding after platesetter failure and goes into a loop. | next failure | |
| FCO 512-00419A | Xpo 3.1.42 for Magnus 400 / Lotem 400 Xpose |
9 Jan 07
|
To improve beam reduction, install Xpo version 3.1.42. Note: For more information, see Xpo 3.1.42 for Magnus 400/Lotem 400 Xpose Release Notes. |
next failure
|
|
| FCO 512-00411A | One-piece upper roller for Magnus 400 and Lotem 400 |
20 Nov 06
|
To resolve the problem of roller marks that appear on plates due to the design of the previous upper roller assembly. Attention: For platesetters released with serial number M41391 and earlier. Note: For more information, see Replacing the upper roller assembly with a one-piece upper roller on Magnus 400 and Lotem 400. |
next failure
|
|
| 512-00389A | Xpo 3.00.82 for Magnus 400 /Lotem 400 Xpose |
28 Sep 06
|
To improve head calibration and to enable slug exposure, install Xpo version 3.00.82. |
next failure
|
|
| 512-00334A | Software Version 1.61.351.012 for Lotem Controller |
19 Mar 06
|
Improve MCF board reliability and enable the support of the updated distribution board. |
next failure
|
|
| 512-00269A | Change crossover connection cable to enable remote support |
24 Jun 05
|
Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. |
next failure
|
|
| 512-00236A | Update 3.2 |
21 Feb 05
|
To increase throughput and improve plate separation, install update 3.2 for version 1.60.09. |
next failure
|
|
| 512-00215A | Update 5 for Xpose version 1.1.47 |
23 Dec 04
|
Install update 5 to resolve low throughput related to TIFF files generated from a Prinergy job, and improve work with rotated files. |
next failure
|
|
| 512-00202A | Unload tray upper rollers |
08 Dec 04
|
To resolve photoactivity or pressure marks on Kodak plates, replace the upper rubber unload rollers with Delrin® rollers. |
next failure
|
 |
| 512-00141A | Accessories CD |
05 Aug 04
|
Install the support tools on the accessory CD to improve the support of the Lotem devices. |
next failure
|
|
| 512-00180A | Update 2 for Lotem Controller 1.60.09 |
03 Aug 04
|
Improve edge detection and enable support of Lotem 200K. |
next visit
|
|
| 512-00133A | Replacing tail gripper shoulder screws |
03 Aug 04
|
To prevent the tail gripper shoulder screws from becoming loose and falling off, replace them with self locking screws. |
next visit
|
 |
| 512-00107A | UDRC with BP Configuration |
18 Feb 04
|
To increase reliability and reduce the need to clean ablation from the internal components of the machine, install a Universal Debris Removal Cabinet (UDRC) kit to vacuum the ablative particles from in front of the optic head, where they are formed. |
next failure 5 hours work |
|
| 512-00105A | UDRC with LC Configuration | ||||
| 512-03285A | Resolving Local3 board does not respond
error message |
01 Feb 04
|
To prevent the Local3 board does not respond
error message, add a capacitator to the reset circuit of the Local3 board. |
next failure
|
|
| FCO 512-00118A | Xpose version 1.1.47 + update 3 |
31 Dec 03
|
To enable Staccato screening, FM screen sets, and one-bit TIFF files, and to resolve seven other issues and bugs, install version 1.1.47 with update 3 |
next failure
|
|
| 512-00097A | Lotem Controller version 1.60.09 |
31 Dec 03
|
To enable support for UDRC, Omron interlocks, and MCU with Lotem 400 Xpose, and to resolve several other issues and bugs, install version 1.60.09. |
next failure
|
|
| 512-03310A | Power Fail Protector |
09 Dec 03
|
To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in OFF status until the On/Off pushbutton is toggled. |
next visit
|
 |
| 512-02139A | Local3 board error |
updated 18 Nov 03
|
Prevent Local3 board error messages caused by conflicting components by connecting a closed circuit connector to each of the Local3 boards. |
next visit
|
 |
| Sealing the optic house opening |
16 Nov 03 |
Prevent dust from reaching the laser optics by sealing the opening where the resolution mechanism fork enters the optic house. |
next failure 1 full day of work |
 |
|
| 512-27688 | L400 Top Door "Lift O Mat" |
09 Apr 03
|
The Lift O Mat assembly has a stronger piston to support and hold the top back door of the platesetter open. |
next failure
|
 |
| FCO 512-00106B |
Load Roller Bar L400 |
19 Mar 03 |
To prevent rollers on the load roller bar from slipping off their springs, implement to install the redesigned load roller bar. |
Next failure
|
 |
| 512-01264/A | Gripper, Loading & Registration |
27 Feb 03
|
To prevent intermittent registration problems caused by drum movement, install new head grippers. |
Next Visit
|
 |
| 29281 | Optic head lens protector ring |
07 Nov 02
|
Install an optic head lens protector ring to prevent the edge of the plate from scratching the optic head lens protector. |
next failure
|
|
| 512-29088 | Y connector for air pipes |
01 Sep 02
|
Replace the Y connector to enable a tight connection to air pipes |
next failure
|
|
| 510F29071 | Gripper actuator guide |
28 Aug 2002
|
Replace gripper actuator guides and bearing assembly to enable both sides of the gripper to reach the detector, and to prevent bearings from falling off. |
Next failure
|
|
Air unit | Connectivity |Debris removal | Drum | Electronics | Mainframe | Optomech | Software
| FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-29088 | Y connector for air pipes | 01 Sep 02 | Replace the Y connector to enable a tight connection to air pipes | next failure |
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-00269A | Change crossover connection cable to enable remote support | 24 Jun 05 | Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. | next failure |
| FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-00107A | UDRC with BP Configuration | 19 Feb 04 | To increase reliability and reduce the need to clean ablation from the internal components of the machine, install a Universal Debris Removal Cabinet (UDRC) kit to vacuum the ablative particles from in front of the optic head, where they are formed. | next failure 5 hours work |
|
| 512-00105A | UDRC with LC Configuration |
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-00133A | Replacing tail gripper shoulder screws | 03 Aug 04 | To prevent the tail gripper shoulder screws from becoming loose and falling off, replace them with self locking screws | next visit | |
| 512-01264/A | Gripper, Loading & Registration | 27 Feb 03 | To prevent intermittent registration problems caused by drum movement, install new head grippers. | Next Visit | |
| 510F29071 | Gripper actuator guide | 28 Aug 02 | Replace gripper actuator guides and bearing assembly to enable both sides of the gripper to reach the detector, and to prevent bearings from falling off. |
next failure 3 hours work |
| FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-03285A | Resolving Local3 board does not respond error
message |
01 Feb 04 | To prevent the Local3 board does not respond
error message, add a capacitator to the reset circuit of the Local3 board |
next failure | |
| 512-03310A | Power Fail Protector | 09 Dec 03 | To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in OFF status until the On/Off pushbutton is toggled. | next visit | |
| FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-27688 | L400 Top Door "Lift O Mat" | 09 Apr 03 | The Lift O Mat assembly has a stronger piston to support and hold the top back door of the platesetter open. | next failure | |
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| Sealing the optic house opening |
16 Nov 03
|
Prevent dust from reaching the laser optics by sealing the opening where the resolution mechanism fork enters the optic house. |
next failure one full work day |
|
|
| 512-00106B |
Load Roller Bar L400 |
19 Mar 03 | To prevent rollers on the load roller bar from slipping off their springs, install the redesigned load roller bar. | next failure | |
| 29281 |
Optic head lens protector ring |
07 Nov 02 | Install an optic head lens protector ring to prevent the edge of the plate from scratching the optic head lens protector. | next failure |
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-00334A | Software Version 1.61.351.012 for Lotem Controller | 19 Mar 06 | Improve MCF board reliability and enable the support of the updated distribution board. | next failure | |
| 512-00323A | Xpo software version 3.00.68 | 22 Nov 05 | Install Xpo version 3.00.68 | next failure | |
| 512-00236A | Update 3.2 | 21 Feb 05 | To increase throughput and improve plate separation, install update 3.2 for version 1.60.09. | next failure | |
| 512-00215A | Update 5 for Xpose version 1.1.47 | 23 Dec 04 | Install update 5 to resolve low throughput related to TIFF files generated from a Prinergy job, and improve work with rotated files. | next failure | |
| 512-00141A | Accessories CD | 05 Aug 04 | Install the support tools on the accessory CD to improve the support of the Lotem devices. | next failure | |
| 512-00180A | Update 2 for Lotem Controller 1.60.09 | 03 Aug 04 | Improve edge detection and enable support of Lotem 200K | next visit | |
| FCO 512-00118A | Xpose version 1.1.47 + update 3 | 31 Dec 03 | To enable Staccato screening, FM screen sets, and one-bit TIFF files, and to resolve seven other issues and bugs, install version 1.1.47 with update 3 | next failure | |
| 512-00097A | Lotem Controller version 1.60.09 | 31 Dec 03 | To enable support for UDRC, Omron interlocks, and MCU with Lotem 400 Xpose, and to resolve several other issues and bugs, install version 1.60.09. | next failure |
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-00180A | Update 2 for Lotem Controller 1.60.09 | 03 Aug 04 | Improve edge detection and enable support of Lotem 200K | next visit | |
| 512-00133A | Replacing tail gripper shoulder screws | 03 Aug 04 | To prevent the tail gripper shoulder screws from becoming loose and falling off, replace them with self locking screws | next visit | |
| 512-03310A | Power Fail Protector | 09 Dec 03 | To prevent damage to machine components due to an electrical power surge, add a power fail protector board to maintain the machine in OFF status until the On/Off pushbutton is toggled. | next visit | |
| 512-02139A | Local3 board error | updated 18 Nov 03 | Prevent Local3 board error messages caused by conflicting components by connecting a closed circuit connector to each of the Local3 boards. | next visit | |
| 512-01264/A | Gripper, Loading & Registration | 27 Feb 03 | To prevent intermittent registration problems caused by drum movement, install new head grippers. | Next Visit | |
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 512-00334A | Software Version 1.61.351.012 for Lotem Controller | 19 Mar 06 | Improve MCF board reliability and enable the support of the updated distribution board. | next failure | |
| 512-00323A | Xpo software version 3.00.68 | 22 Nov 05 | Install Xpo version 3.00.68 | next failure | |
| 512-00269A | Change crossover connection cable to enable remote support | 24 Jun 05 | Enable remote support by changing the crossover connection leading from the platesetter to the Brisque with a network connection. | next failure | |
| 512-00236A | Update 3.2 | 21 Feb 05 | To increase throughput and improve plate separation, install update 3.2 for version 1.60.09. | next failure | |
| 512-00215A | Update 5 for Xpose version 1.1.47 | 23 Dec 04 | Install update 5 to resolve low throughput related to TIFF files generated from a Prinergy job, and improve work with rotated files. | next failure | |
| 512-00141A | Accessories CD | 05 Aug 04 | Install the support tools on the accessory CD to improve the support of the Lotem devices. | next failure | |
| 512-00107A | UDRC with BP Configuration | 19 Feb 04 | To increase reliability and reduce the need to clean ablation from the internal components of the machine, install a Universal Debris Removal Cabinet (UDRC) kit to vacuum the ablative particles from in front of the optic head, where they are formed. |
next failure 5 hours work |
|
| 512-00105A | UDRC with LC Configuration | ||||
| 512-03285A | Resolving Local3 board does not respond error
message |
01 Feb 04 | To prevent the Local3 board does not respond
error message, add a capacitator to the reset circuit of the Local3 board |
next failure | |
| FCO 512-00118A | Xpose version 1.1.47 + update 3 | 31 Dec 03 | To enable Staccato screening, FM screen sets, and one-bit TIFF files, and to resolve seven other issues and bugs, install version 1.1.47 with update 3 | next failure | |
| 512-00097A | Lotem Controller version 1.60.09 | 31 Dec 03 | To enable support for UDRC, Omron interlocks, and MCU with Lotem 400 Xpose, and to resolve several other issues and bugs, install version 1.60.09. | next failure | |
| Sealing the optic house opening |
16 Nov 03
|
Prevent dust from reaching the laser optics by sealing the opening where the resolution mechanism fork enters the optic house. |
next failure one full work day |
|
|
| 512-27688 | L400 Top Door "Lift O Mat" | 09 Apr 03 | The Lift O Mat assembly has a stronger piston to support and hold the top back door of the platesetter open. | next failure | |
| 512-00106B |
Load Roller Bar L400 |
19 Mar 03 | To prevent rollers on the load roller bar from slipping off their springs, install the redesigned load roller bar. | next failure | |
| 29281 |
Optic head lens protector ring |
07 Nov 02 | Install an optic head lens protector ring to prevent the edge of the plate from scratching the optic head lens protector. | next failure | |
| 512-29088 | Y connector for air pipes | 01 Sep 02 | Replace the Y connector to enable a tight connection to air pipes | next failure | |
| 510F29071 | Gripper actuator guide | 28 Aug 02 | Replace gripper actuator guides and bearing assembly to enable both sides of the gripper to reach the detector, and to prevent bearings from falling off. |
next failure 3 hours work |