Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Notes:
|
FCO |
FCO Name |
Date |
Description |
Type |
Illustration |
|---|---|---|---|---|---|
| 28944 |
Light detector with lens brush |
01 Sep 02 | Add small lens-cleaning brush to light detector hood to prevent debris build-up on lens protector, and resulting decline in image quality and diode function. | next failure | |
| 28131 |
Replace unsealed light detector with sealed one. |
29 May 02 | Eliminate damage to light detector, and its malfunction, by preventing dust from entering it. |
C
|
|
| 28845 |
Seal horizontal grooves on drum with epoxy glue |
27 May 02 | Prevent plates getting stuck on drum, caused by horizontal grooves on drum. |
C |
|
|
Replace mother and daughter boards by removing and installing all diode brackets including their LDD boards and diodes. |
28 Feb 02 |
Safeguard against condensation to prevent shorts within the L Box. |
M 1 full work day |
||
|
Replace old lock tongue on top door with new lock tongue. |
13 Feb 02 |
Prevent Lotem 400 top door from getting stuck with redesigned lock tongue for door. |
C |
||
|
Replace old NUC in stock with new NUC board Comp level P. |
12 Feb 02 |
Comp level of NUC board changed, so catalog number must be updated accordingly. |
C
|
||
|
Replace old CTP power distribution board in wtock with new CTP power distribution board Comp level P. |
02 Feb 02 |
Comp level of CTP power distribution board was changed, so catalog number was changed to make it compatible with comp level. |
C
|
||
| Glue sticker with diagram on back panel. | 04 Feb 02 |
Show specific location of preload. Order new part 374A7B127. |
C
|
||
| Install cover on conveyor. | 06 Nov 01 | Prevent ambient light from activating detector when no plate is present on conveyor. |
C
|
||
| Replace vacuum hose, vacuum pump nipple, swivel hose interface and vacuum hose adapter. | 04 Nov 01 | Increase reliability with new improved vacuum hose. |
C
|
||
| Replace old Local 3 box with newly designed box. | 05 Aug 01 | Prevent damage to electrical shorts on Local board and Local 3 pins. |
C
|
||
| Remove left bracket. | 15 May 01 | Prevent Y chain from hitting left bracket near drum when XY bar moves toward drum. |
C
|
||
| Use the NUC Comp level N or higher. | 15 May 01 | Prevent errors from left and right locals when upgrading to S/W version 1.30.04. |
C
|
||
| Replace all six head spoilers from 8-mm to 12-mm pins. | 13 May 01 | Solve registration problems for plates wider than 550 mm. |
M 4 hours work |
||
| Secure board and detector base to detector cover with epoxy glue, and attach plate guides to punches. | 11 Feb 01 |
Improve punch system reliability. Order new part 510F27707. |
C 1 hour per punch |
||
| Replace old bracket on HP detector side with new one. | 07 Jan 01 | Prevent unwanted lines on image due to friction between carriage and V groove as a result of chain base bracket pressing on oiling kit bracket. |
C
|