Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Parts/tools

BOMs and assembly drawings | Ordering consumables | Parts by type | See also | Tools | FRU locator

The parts information provided on TechPlanet may not be the latest. The latest assembly drawings and BOMs can be found in Agile.  Username = ccaother;  Password = agile2

FRU locator (Trendsetter 400/800 II and III)

Use this tool to locate information about field replaceable units (FRUs) for Trendsetter 400/800 II and III models.

Click the images to the left to go to the visual parts locator pages.

On any page that has a “preview” icon like the one below, you can click the active areas of an image to find parts in those areas.

Tip: If you roll your pointer over a “preview” icon, all of the clickable areas of the image on that page will be highlighted.

BOMs and Assembly drawings

TSM
(MCE, II)
  • Serial numbers TM015 and up
  • Auctus serial numbers AM001 and up
    Note: This page is no longer being kept up-to-date. If you are looking for information about FRUs for TSM devices, use the FRU locator instead.
TS8
  • Creo serial numbers TE004 and up
  • Heidelberg serial numbers S003860001 and up
TS3/8
  • TS3 base with a TS8 engine
  • Creo serial numbers S332 and up
  • Heidelberg serial numbers S993631324 and up in the Sxx363xxxx series only
TS3
  • Creo serial number from SP01 to SP06 and S007 to S331
  • Heidelberg serial numbers from S983631001 to S993631323 in the Sxx363xxxx series only
TS4
  • No Creo production units
  • Heidelberg serial numbers from S003710001 to S003710180, and from S00385001 and up in the Sxx371xxxx and Sxx385xxxx series only

Parts by type

MCE

MPE
MCE Boards MPE Boards
TMCE and GMCE Cables MPE Cables
  Thermal 1.x head cables for MPE Devices
MCE Cylinders MPE Cylinders
MCE Sensors MPE Sensors
Fan box (TS8) Fan box (TS3,TS3/8)
  Heat exchanger (TS3,TS3/8)
MCE Power box (TSM) MPE Power box (TS3,TS3/8,TS8)
Air supply filter/regulator
Pneumatic hoses, tubing, and fittings
Carriage
Chiller (External)
Debris Removal
Engine
Load ramp
Thermal head 1.7

See also

Tools

Ordering Consumables

Consumables required for Preventative Maintenance.

Customers can order maintenance supplies such as air filters, etc., using the Kodak Maintenance Accessory Order Form for Prepress and Enterprise Solutions downloadable from the Worldwide Products and Pricing Information page on EPSweb. The order form, when complete, should be faxed to 604-451-2760, or e-mailed as an attachment to callcentre@creo.com Attn: Response Centre - First call Team.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.