Procedures

For installation procedures, see the Installation page. For connectivity procedures, see the Connectivity page.

Adjustment/alignment | Calibration | Configuration | Load/unload | Other procedures | Parts replacement | Upgrades

Adjustment/alignment

MCU II and SCU II

• Adjusting the drum vibration sensors (updated 23 Jun 2008)
• Adjusting interlocks on Magnus 400 and Lotem 400 platesetters (09 Oct 2006)
• Adjusting the Punch Detector on Platesetters with MCU Configurations (updated 04 Jul 2006)

Calibration

MCU II and SCU II

• Adjusting the paper disposal detector
• Calibrating the paper/metal detector (30 Mar 2004)

Punch conveyor

• Calibrating the alignment system on the punch conveyor (28 Feb 2008)

Configuration

MCU II and SCU II

• Resetting the Local3 board on Magnus 400 (12 Jul 2006)

Load/unload

MCU II and SCU II

• MCU II for Magnus 400 II and Magnus 400 II Quantum 1.05.394 Plate Loading Sequence and Parameters Guide (DRAFT 07 - 01 Oct 2007)

Other procedures

MCU II and SCU II

• Installing punches (04 May 2008)
• Installing the center punch on Lotem 400 and Magnus 400 (18 Mar 2007)
• Opening the MCU II front door manually (02 Apr 2008)

Punch conveyor

• Punch Conveyor Packing Instructions (05 Jun 2008)
• Replacing the MSB_C and installing the MSB firmware manually (10 Feb 2008)

Parts replacement

Punch conveyor

• Removing and installing the alignment system motors (18 Mar 2008)
• Removing and installing the alignment system optical sensors (17 Mar 2008)
• Removing and installing alignment system detectors (16 Mar 2008)
• Removing and installing the alignment system assembly on the punch conveyor (16 Mar 2008)
• Removing and installing the MSB_C motherboard (10 Mar 2008)
• Replacing the support roller (20 Jan 2008)
• Replacing the support roller motor (20 Jan 2008)
• Replacing the support roller belt (20 Jan 2008)
• Replacing the LED detector (20 Jan 2008)
• Replacing the conveyor belt motor (20 Jan 2008)
• Replacing a conveyor belt (05 Jan 2008)

Upgrades

MCU II and SCU II

• Upgrading a semiautomatic (manual) platesetter to an automatic platesetter with MCU II/SCU II (18 May 2008)
• Upgrading Magnus 400 II with SCU II to Magnus 400 II with MCU II (10 Jan 2008)