Procedures

For installation procedures, see the Installation page. For connectivity procedures, see the Connectivity page.

Adjustment/alignment | Backup | Calibration | Configuration | Debris removal | Load/unload | Media | Parts replacement

Adjustment/alignment

• Adjusting the drum vibration sensors (updated 23 Jun 2008)
• Adjusting edge detection on Magnus 400 Quantum (30 Jan 07)
• Aligning HP and EP on the carriage motor on Magnus 400 Quantum (30 Jan 07)
• Adjusting interlocks on Magnus 400 and Lotem 400 platesetters (09 Oct 2006)
• Adjusting the clearance between the tail gripper spoilers and the drum on Magnus 400 (01 Aug 2006)
• Exposing in half resolution (05 Sep 2004)
• Carriage home position (HP) detector calculation (12 Feb 2003)
• Image Start Area Adjustment (11 Mar 2004)
• Mshift and Sshift parameters - calculating and adjusting (30 Jun 2003)
• Z-stage adjustment procedure
• Calculating the edge surface reflectivity (edge sr) (11 Feb 2004)
• Finding the correct drum position for edge detection (26 Feb 2003)

Backup

• Saving and restoring NVS parameters on a Magnus 400 Quantum platesetter (10 Apr 2007)
•  Saving log files manually (16 Feb 2003)

Calibration

• Calibrating error and sum using Z-stage on Magnus 400 Quantum (30 Jan 07)
• Calibrating image quality on Magnus 400 Quantum (28 Jan 07)
  • Focus series
  • Power series
  • Slope series
  • Curve series
  • Mscale and Sscale
  • Ortho
  • Rotation
• Calibrating grippers on Magnus 400 and Lotem 400 platesetters (07 Aug 2006)
• Ring wrench for Lotem 400 Quantum calibration (09 May 2002)

Configuration

• Installing NVS parameters on Magnus 400 Quantum (30 Jan 2007)
• Setting machine resolution on Magnus 400 Quantum and Lotem 400 Quantum (03 Oct 2006)
• Using Service Shell on Lotem
• Accessing Thermal 2 head parameters in MCE When working with MCE version 1.26 or higher
• Setting up a Modem (24 Jun 2003)
• Working with NVS commands (12 Feb 2003)

Debris removal

• Thermal 2 Debris Removal Nozzle Cleaning Procedure

Media

• Defining media on Magnus 400 Quantum (30 Jan 07)

Parts replacement

• Removing and installing the power distribution board (04 May 2008)
• Removing and installing the leadscrew (30 Apr 2008)
• Removing and installing the drum motor (01 Apr 2008)
• Installing the center punch on Lotem 400 and Magnus 400 (18 Mar 2007)
• Replacing the drum encoder on Magnus 400 (18 Feb 2007)
• Replacing TH2 on Magnus 400 Quantum (5 Feb 2007)
• Replacing the upper roller assembly with a one-piece upper roller on Magnus 400 and Lotem 400 (20 Nov 2006)
• Replacing spring spoilers on Magnus 400 and Lotem 400 (11 Sep 2006)
• Cooling Fan Replacement (01 Nov 2004)
• Carriage Amplifier board replacement—P/N 503C1508A (19 Jul 2001)
• Head Gripper Replacement (13 Nov 2003)
• Power supply (P/S) replacement
• Replacing a TMCE board
• Water pump replacement