Procedures

For installation procedures, see the Installation page. For connectivity procedures, see the Connectivity page.

Adjustment/alignment | Backup | Calibration | Configuration | Debris removal | FCO procedures | Load/unload | Maintenance | Parts replacement | Upgrades

Note: Some links point to Lotem™ 800 Quantum procedures because many of the procedures are identical.

Adjustment/alignment

• Adjusting the drum vibration sensors (31 Oct 2007)
• Adjusting interlocks on Magnus 400 and Lotem 400 platesetters (09 Oct 2006)
• Exposing in half resolution (05 Sep 2004)
• Carriage home position (HP) detector calculation (12 Feb 2003)
• Geometric correction (GC) - rotation (14 Aug 2003)
• Image Start Area Adjustment (11 Mar 2004)
• Mshift and Sshift parameters - calculating and adjusting (30 Jun 2003)
• Z-stage adjustment procedure

Backup

•  Saving log files manually (16 Feb 2003)

Calibration

• Calibrating grippers on Magnus 400 and Lotem 400 platesetters (07 Aug 2006)
• Limitations of punch configuration for 0.15 kit (10 Apr 2002)
• Lotem 400 Quantum Calibration (04 Jun 2002)
  
  • New media definition
  • Edge detection procedure
• Ring wrench for Lotem 400 Quantum calibration (09 May 2002)

Configuration

• Setting Machine Resolution on a Magnus 400 Quantum and Lotem 400 Quantum Platesetter (03 Oct 2006)
• Using Service Shell on Lotem
• Accessing Thermal 2 head parameters in MCE When working with MCE version 1.26 or higher
• Setting up a Modem (24 Jun 2003)
• Working with NVS commands (12 Feb 2003)
• Software versions on Lotem™ Quantum machines (13 Jan 2003)

Debris removal

• Thermal 2 Debris Removal Nozzle Cleaning Procedure
• Routing the Debris Air Tube to the Head (03 Jan 2002)

FCO procedures

• Replacing the upper roller assembly with a one-piece upper roller on Magnus 400 and Lotem 400 (20 Nov 2006)

Load/unload

• Loading a patch to TMCE (13 Oct 2002)
• Loading TMCE main firmware for Lotem 400 Quantum using Splot
• Loading Head firmware for Lotem 400 Quantum using Splot
• Loading Xilinx firmware for Lotem 400 Quantum using Splot
• Loading post code firmware for Lotem 400 Quantum using Splot
• Loading boot code firmware for Lotem 400 Quantum using Splot

Maintenance

• Cleaning the drum vacuum holes on the Lotem 400, Lotem 800, and Magnus 400 platesetters (02 Jul 2007)

Parts replacement

• Installing the center punch on Lotem 400 and Magnus 400 (18 Mar 2007)
• Cooling Fan Replacement (01 Nov 2004)
• Carriage Amplifier board replacement—P/N 503C1508A (19 Jul 2001)
• Drum Motor Replacement (12 Feb 2004)
• Head Spoilers to resolve registration pins location conflict with plate size (18 Jun 2003)
• Head Gripper Replacement (13 Nov 2003)
• Load Roller Bar Replacement (13 Nov 2003)
• Power Supply (P/S) replacing
• Replacing the TMCE board
• TMCE Nylon Spacer Replacement

Upgrades

• Updating the Bios with the Automatic BIOS Diskette (updated 13 Oct 2004)
• Upgrading the Brisque version (04 Feb 2002)