Procedures

For installation procedures, see the Installation page. For connectivity procedures, see the Connectivity page.

Adjustment/alignment | Backup | Calibration | Configuration | Maintenance | Other procedures | Parts replacement | Upgrades

Adjustment/alignment

• Attaching a plate to the head registration pins (12 Aug 2008)
• Adjusting the drum vibration sensors (updated 23 Jun 2008)
• Adjusting interlocks on Magnus 400 and Lotem 400 platesetters (09 Oct 2006)
• Adjusting the clearance between the tail gripper spoilers and the drum on Magnus 400 (01 Aug 2006)
• Aligning home position and end position on the carriage motor (06 Jun 2006)
• Height/Width Start Image Area Adjustment (04 May 2004)
• Drum Balance Adjustment on Lotem 400 (09 Mar 2004)

Backup

• Saving log files manually (16 Feb 2003)

Calibration

Calibration tests

• Calibration Test Procedures Overview (11 Jun 2008)
• Focus Calibration Test (updated 11 Jun 2008)
• Elevation Adjustment Procedure (updated 11 Jun 2008)
• Laser Uniformity Calibration Test (11 Jun 2008)
• Resolution Calibration Test (updated 11 Jun 2008)
• Delay Calibration Test (updated 11 Jun 2008)
• Intensity Calibration Test (updated 11 Jun 2008)
• Drum Speed Calibration Test (updated 11 Jun 2008)

Other

• Calibrating grippers on Magnus 400 and Lotem 400 platesetters (07 Aug 2006)
• Calibrating image quality on Lotem 400 FH platesetters and Magnus 400 platesetters with an LDA head (31 May 2006)
• Calibrating the plate length detector on Magnus 400 (24 Apr 2006)
• Balance system calibration
• Const Conversion Thicknesses to Focus Motor Parameter Calculation (25 Nov 2003)
• Side-to-Side procedures (updated 27 Nov 2007)

Configuration

• Configuring punches on Magnus 400 (27 Mar 2007)

Maintenance

• Cleaning the drum vacuum holes on the Lotem 400, Lotem 800, and Magnus 400 platesetters (02 Jul 2007)

Other procedures

• Replacing the MSB_C and installing the MSB firmware manually (10 Feb 2008)
• Splicing diodes on Magnus 400 platesetters (12 Jun 2007)

Parts replacement

• Installing improved spring spoilers on Magnus 400 II family (12 Aug 2008)
• Removing and installing the power distribution board (04 May 2008)
• Removing and installing the leadscrew (30 Apr 2008)
• Removing and installing the drum motor (01 Apr 2008)
• Replacing/repairing laser diodes on Magnus 400 platesetters (12 Jun 2007)
• Replacing the drum encoder on Magnus 400 (19 Feb 2007)
• Replacing the LDA head on Magnus 400 (updated 12 Dec 2007)
• Diodes Safe Replacement (02 Jan 2006)
• Flow Switch Replacement (27 Oct 2005)
• Light Detector Replacement (20 Oct 2005)
• Chiller Replacement (01 Mar 2005)
• Distribution box 514-00027A replacement (05 Jun 2003)
• Head Gripper Replacement (13 Nov 2003)
• Load Roller Bar Replacement (13 Nov 2003)

Upgrades

• Upgrading from Magnus 400 II S speed to Magnus 400 II F speed (11 Jun 2008)
• Upgrading Magnus 400 Controller Versions 1.02.392 and 1.04.393 to 1.05.394 (Draft 05 - 23 Dec 2007)