EXPOSE

• In Brisque version 4.1.76, hairlines appear on the plate or film (27 Apr 2006)
• Error message 5230 “Illegal buffer” appears on ThermoFlex Mid and Narrow (11 Oct 2005)
• Error message “TSP buffer full while waiting for Dolev” on Brisque for Dolev 800 (28 Oct 2004)
• In Brisque 4.1, error 5412 appears during expose (no plotter was connected) (28 Oct 2004)
• In Brisque 4.1, exposing from Dolev imagesetters with VLSI connection causes a spiral stop (15 Sept 2004)
• The expose of 1-bit TIFF files with Staccato screen fails (31 Mar 2004)
• Large film cassettes do not switch automatically while using punch on Dolev 800 family (20 Oct 2003)
• Distorted dot shape patterns appear on media when exposing with Dolev 800V
• Brisque is slow exposing a one-bit TIFF with grayscale and/or registration marks
• Dolev800V^3 - Screen shift problem with TSP100

CONFIG

• On the Brisque 6F1 platform, a deleted output device cannot be reconfigured (15 May 2006)
• In Brisque 4.1, an error message appears when you configure an imagesetter in parallel to an S or F speed platesetter (15 Jan 2004)
• Clip Buffer Allocation Error
• In Brisque 4.0.97, you cannot configure a new device after a restore
• In Brisque 4.0, error message “Machine type is not as expected”, or “No Machine type” appears

SCREEN SETS

• Turbo Screening home page.
• Turbo FM screen sets are missing from the Dolev 4Press screen set list (18 Nov 2003)
• Dolev800V^3 - Screen shift problem with TSP100

Staccato home page.

EXPOSE

• TSP error 7125 when exposing 1-bit TIFF files from Brisque to Lotem 800, Lotem 400 and Magnus 400 (19 Oct 2006)
• In Brisque version 4.1.76, hairlines appear on the plate or film (27 Apr 2006)
• Error messages appear when exposing with MCE devices
• Problem exposing CTs in Brisque 4.1.76+Output_7 and MCE devices with 2 TSPs and Staccato
• Error message 5230 “Illegal buffer” appears on ThermoFlex Mid and Narrow (11 Oct 2005)
• In Brisque 4.1.76, quality problem when using Staccato screen sets (30 Mar 2005)
• Data channel not detected (error 5230) when exposing with MCE devices (14 Oct 2004)
• The expose of 1-bit TIFF files with Staccato screen fails (31 Mar 2004)
• Brisque version 4.1: Preventing a 2-3% dot variation between separations (09 Feb 2004)
• In Brisque 4 and Brisque 5, jobs with certain screen set parameters are exposed on Lotem 400 and Lotem 800 with a reduced number of Beams (02 Feb 2004)
• Plate expose stops responding at 99% and lines appear on the plate in Brisque to Lotem Quantum or Trendsetter MCE system (18 Nov 2003)
• Brisque error message: Interhead margin values must be between 10 and 500
• Excurve correction results mirror the required results when exposing with positive plates with Lotem 400 Chemistry-free
• Plate marks overprint in areas where mark data is 0% in Brisque 4.1.76 (01 Sep 2003)
• Preventing passes when exposing mixed (Staccato/AM) files (07 Aug 2003)
• Brisque 4.0.97.23, Tone Reproduction is not applied to some parts of a layout (02 Jun 2003)
• When Staccato is used to expose a copydot file, the quality of the exposed plate is poor, or error 7125 appears during expose
• When a job is exposed, tone reproduction is not applied to the plate, or a black frame appears around the plate's color bar
• Brisque cannot expose or rotate a single-strip one-bit TIFF file created by Harlequin RIP
• Brisque is slow “fetching” a single-strip one-bit TIFF file before exposing it to a platesetter
• Trendsetter VLF V-speed retraces and performs slowly during expose
• In Brisque 3.0.38 and 4.0, Punch offsets change on the Lotem for Preps Jobs
• Overlapping marks in stuck Brisque 3.0.38 and 4.0 Imposition files cause the Lotem to display a high stop spiral value
• Turbo Screening Processor (TSP) board locations in Lotem Quantum
• Brisque is slow “fetching” a single-strip one-bit TIFF file before exposing it to a platesetter
• Brisque cannot expose or rotate a single-strip one-bit TIFF file created by Harlequin RIP
• Expose fails with an error when the device is connected to a Brisque 4.85.5 F50 or 6F1 platform

CONFIG

• On the Brisque 6F1 platform, a deleted output device cannot be reconfigured (15 May 2006)
• ModelProperties file for a device name does not exist (01 Feb 2005)
• In Brisque 4.1, an error message appears when you configure an imagesetter in parallel to an S or F speed platesetter (15 Jan 2004)
• In Brisque 4.0.97, you cannot configure a new device after a restore
• In Brisque 4.0, error message “Machine type is not as expected”, or “No Machine type” appears
• Clip Buffer Allocation Error

SCREEN SETS

• Turbo Screening home page
• User screen sets accumulate spot color names

EXPOSE

• In Brisque version 4.1.76, hairlines appear on the plate or film (27 Apr 2006)
• Delay and Plotter I/F diagnostics tests fail in Brisque on ThermoFlex Mid and Narrow (20 Sep 2005)
• Mismatched plotter expose lines appear intermittently on ThermoFlex Mid and Narrow (20 Aug 2005)
• Error message 5230 “Illegal buffer” appears on ThermoFlex Mid and Narrow (23 May 2005)
• Plate marks overprint in areas where mark data is 0% in Brisque 4.1.76 (01 Sep 2003)

CONFIG

• ModelProperties file for a device name does not exist (01 Feb 2005)
• In Brisque 4.0.97, you cannot configure a new device after a restore
• In Brisque 4.0, error message “Machine type is not as expected”, or “No Machine type” appears

SCREEN SETS

• User screen sets accumulate spot color names

Staccato home page

EXPOSE

• Plate set or Media set problems when exposing from Brisque to Trendsetter (29 Nov 2006)
• Many retracing occurrences when exposing from Brisque to Trendsetter MPE (03 Aug 2006)
• In Brisque version 4.1.76, hairlines appear on the plate or film (27 Apr 2006)
• Error messages appear when exposing with MCE devices
• Problem exposing CTs in Brisque 4.1.76+Output_7 and MCE devices with 2 TSPs and Staccato
• Error message 5230 “Illegal buffer” appears on ThermoFlex Mid and Narrow (11 Oct 2005)
• In Brisque 4.1.76, quality problem when using Staccato screen sets (30 Mar 2005)
• Print Console Displays Constant Error Message in Brisque Direct to Trendsetter Configuration
• Data channel not detected (error 5230) when exposing with MCE devices (14 Oct 2004)
• The expose of 1-bit TIFF files with Staccato screen fails (31 Mar 2004)
• In Brisque 4.1, there is no manual bypass option for Trendsetter 800 II ContinuousLoad (01 Mar 2004)
• Plate expose stops responding at 99% and lines appear on the plate in Brisque to Lotem Quantum or Trendsetter MCE system (18 Nov 2003)
• Plate marks overprint in areas where mark data is 0% in Brisque 4.1.76 (01 Sep 2003)
• Preventing passes when exposing mixed (Staccato/AM) files (07 Aug 2003)
• When exposing a job from Brisque 4.1, the last separation stops processing and fails (29 Jul 2003)
• Brisque To Trendsetter troubleshooting Guide (04 Dec 2001)
• Brisque unable to recognize the Trendsetter on the differential SCSI channel (27 Jul 2003)
• “No response from device” message appears and Brisque fails to expose two or more queued jobs on the Trendsetter 800 platesetter (24 Jul 2003)
• Comparison of Brisque SCSI differential adapters document
• Brisque is slow “fetching” a single-strip one-bit TIFF file before exposing it to a platesetter
• When Staccato is used to expose a copydot file, the quality of the exposed plate is poor, or error 7125 appears during expose
• Brisque cannot expose or rotate a single-strip one-bit TIFF file created by Harlequin RIP
• Trendsetter VLF V-speed retraces and performs slowly during expose
• When a job is exposed, tone reproduction is not applied to the plate, or a black frame appears around the plate's color bar
• Update EP1_2 & Brisque2TS causes TSP errors 7106 and 7125 when the Brisque is connected to a Trendsetter (Platesetter only)
• Print Console displays constant error message in Brisque Direct configuration
• BrisqueAgent 1.00.44 does not start after upgrading from an earlier version
• Expose fails with an error when the device is connected to a Brisque 4.85.5 F50 or 6F1 platform (28-Oct-01)

CONFIG

• On the Brisque 6F1 platform, a deleted output device cannot be reconfigured (15 May 2006)
• ModelProperties file for a device name does not exist (01 Feb 2005)
• In Brisque 4.1, there are config problems when installing Magnus VLF (12 Aug 2004)
• Imaging in 1200 dpi not possible on Trendsetter VLF Autoloader (10 Aug 2004)
• In Brisque 4.1, an error message appears when you configure an imagesetter in parallel to an S or F speed platesetter (15 Jan 2004)
• Screen sets are not available and/or the Plate Expose dialog box stops responding for Trendsetter or Spectrum (24 Sep 2003)
• Software and firmware recommendations for Brisque Direct Connect to Trendsetter (29 Jul 2003)
• Brisque To Trendsetter troubleshooting Guide (04 Dec 2001)
• Clip Buffer Allocation Error
• In Brisque 4.0.97, you cannot configure a new device after a restore
• Unable to create or modify a Trendsetter and or Spectrum Device using Brisque 4.0

SCREEN SETS

• Turbo Screening home page
• User screen sets accumulate spot color names

EXPOSE

• Problem exposing CTs in Brisque 4.1.76+Output_7 and MCE devices with 2 TSPs and Staccato
• In Brisque 4.1.76, quality problem when using Staccato screen sets (30 Mar 2005)
• Cannot expose a tile-composed one-bit TIFF file created by Screen2Go
• Screen2Go size limitations in Brisque 3.0.08 and 4.0
• When Staccato is used to expose a copydot file, the quality of the exposed plate is poor, or error 7125 appears during expose
• Screen2Go size limitations in Brisque 3.0.38 and 4.0

CONFIG

• Screen2Go file-naming convention for TIFF files changes after migrating from Brisque 4.0 to Brisque 4.1.76 (09 Jul 2003)
• Screen2Go size limitations in Brisque 3.0.08 and 4.0

SCREEN SETS

• Turbo Screening home page
• User screen sets accumulate spot color names

error/system messages

• Print Console Hotfolders give 'Access is Denied' message
• Hummingbird 7.0 Fails when Loading on Windows 2000
• Network problems causing TIFF corruption

known problems

• Can not expose a tile-composed one-bit TIFF file created by Screen2Go
• Screen2go size limitations

Turbo Screening home page

• Using a device link profile created in Profile Wizard Mio 3.1.100 with Brisque may result in color distortion (21 Mar 2006)
• In Brisque 4.1, the DCP Color Set window aborts (15 Mar 2004)
• Spot colors do not appear on CMYK proofs in Brisque 4.x (08 Jan 2004)
• Plates and or Proofs Hanging Using Direct Connect to Trendsetter (03 Feb 2002)
• Sending proofs from Brisque 3.x or 4.0 (EP1) to KodakXP causes the error message “TSP don’t fetch data”
• Unable to create or modify a Trendsetter and or Spectrum Device using Brisque 4.0

• Using a device link profile created in Profile Wizard Mio 3.1.100 with Brisque may result in color distortion (21 Mar 2006)
• Imposition Jobs sometimes fail on Expose Stylus Pro 9600 (18 Jul 2005)
• When printing a job, and the job height is more than the default printer size, the paper is cut off according to the default size (10 August 2004)
• Layout Trim problems when printing to HP printers (01 June 2004)
• Communication timeout occurs when sending jobs from Brisque 4.x to HP printers (31 May 2004)
• In Brisque 4.1, the DCP Color Set window aborts (15 Mar 2004)
• Brisque 4.1 does not send data to the printer and the job is timed out (07 Oct 2003)
• Black dots appear in background in output from Brisque 4.1.76 with Improof (29 Sep 2003)
• ImPress printers fail to work with Brisque 4.1.76 (29 Sep 2003)
• After migrating from Brisque 4.0.97.x to 4.1.76, system error 10001 appears (29 Sep 2003)
• "Proofer communication error" message appears when more than two Improof jobs are waiting in the queue (29 Sep 2003)
• Brisque is slow printing a job to an Improof output device before performing Plate Expose (01 Apr 2003)
• Brisque cannot communicate with “HP designjet 1050c plus” via TCP/IP (01 Apr 2003)
• Intermittent Communications Problems Between the 43WIDE and Brisque
• “Proofer communication error” message appears when proofing to HP Designjet 5000 printer
• Brisque 43P-150 platform cannot proof to Iris43WIDE if attached using a parallel port connection
• A Communication error occurs in Brisque 4.0 when trying to configure a HP printer

• Using a device link profile created in Profile Wizard Mio 3.1.100 with Brisque may result in color distortion (21 Mar 2006)
• In Brisque 4.1, the DCP Color Set window aborts (15 Mar 2004)
• Configuring Brisque to Output Proofs to Veris

• Using a device link profile created in Profile Wizard Mio 3.1.100 with Brisque may result in color distortion (21 Mar 2006)
• In Brisque 4.1, the DCP Color Set window aborts (15 Mar 2004)
• In Brisque, white lines appear in proofs when an image is placed on top of a LW background

• One or more layouts are not proofed when a multiple layout job is sent to Integris (06 Dec 2005)
• Imposition job fails when sent to Integris via BPA (03 Jan 2005)
• In Brisque 4.1, the DCP Color Set window aborts (15 Mar 2004)

• Customer Alert: QuarkXPress 6.1 warns about corrupt fonts when printing on Mac OS X [ID: 50610] (23 Mar 2004)
• Brisque cannot expose or rotate a single-strip one-bit TIFF file created by Harlequin RIP
• Tip - Creating a one-bit TIFF file with Agfa™ Apogee

DCS
EPS
OPI
PDF
TIFF

Color2Disk
copydot
hairlines
known problems
PPD
templates
troubleshooting guides
SciSmit

AIX
board failures
error/system messages
graphics
hang/crash
installation
Macintosh
SciSmit
servers
SMS
startup
Timna
UPS

Impose
Preps

Helios
General
installation
Mac OS X
servers
startup
system dumps

Support tools for Brisque, Brisque Serve, and Timna

device configuration tips
transferring files
remote support

duotones
error/system messages
FAF/trapping
fonts
hot folders
license
OPI
overprint
preview
RIP
screen captures
spot colors
templates
versioning
vignettes

Illustrator
Microsoft Word
Photoshop
PressTouch
QuarkXPress
Windows NT